?????????

[freaksfix]

Is a 350X rear rotor the same as an 86 250R rotor????

[Lots_Of_Nothing]

Yes, It is

[jeswinehart]

i am sure i have a r rotor on the front of my 85 350x as well.

john

[freaksfix]

I know the fronts are the same between the 200X, 350X, 250R ( I must have atleast 7 in the garage) I was just wondering about the back... thanks..

[Lots_Of_Nothing]

well if the front is the same, why wouldnt the rear be the same?

[xmen]

I'm not sure abour that!!!
The front one is the same but on a 250r 85-86 the rear brake rotor is smaller and a lot more expensive!!

[Mike Fort Laud]

EBC shows the same part # MD6059 for ATC 200X,250R,and 350X. For the rear rotor EBC lists ATC 250R is #MD6007D and ATC 350X is MD 6061D . The rear rotors are different!!!!!!!!!!!!

[ATCRYDER]

Yes, good clearing that up. After Looking @ my 86/87 200X and my 85/86 R Rear Rotors, they are the same thing it looks like.......Whether they have the same heat dissepation (sp) holes, Im not sure but it appaears so, but You can surely use one on the other.

[ATCnut]

The 350X front and rear rotor are different. The front has a round hole in the middle, and three small holes for the mounting bolts. The rear rotor has four small holes for mounting, and a bigger cutout in the middle. See the pic. The 350x front rotor is the same as the early 200x front and rear rotors. One reason that Honda had to change the 350X rear rotor was that the big round hole in the existing 200x rotor would not fit over the larger diamater 350X axle.