questions about an X

[smokinp]

I am building up a 200x from ground up and I am wondering...
1.I can't seem to find a set of aftermarket rims that are chrome(or something nice) that will bolt up to the hubs
2.What hubs can I use besides the stock ones?
3.I've heard that you can use the brake system off a cr 250 because I have nothing for brakes except the rotors(no cailbers,lines etc.)

[84honda 200X]

The ITP 9 pro sereis rims will fit on the stock hubs along with the douglas rims. You can also use 250R hubs or any honda hub they all have the same splines.

[YTZ250#1]

250r hubs won't work,they are 25 spline.your x should be 24 spline.I used a set of 300ex or 250x hubs on mine add they worked great with 400ex wheels.It added a few inches to the width also.you should be able to find 200x brakes on ebay if no one here has any for sale.

[smokinp]

ok,thanks for the info.so what size rim would I need if i went with 22x12x8 tires?a 9x8 rim?

[YTZ250#1]

you should be able to run your stock wheels,they should be 8x8.

[atc krazy]

hope the project goes smoth

[84honda 200X]

8x8 is the stock rim size for the 200X and i think it has a 4/100 around there or something like that for a bolt pattern.

[leprogle]

4/110 actually (the "norm" for most honda's)

[84honda 200X]

:Bounce hey i was close i new it was somethin like i put but ill remeber it for when i get new rims ;)

[smokinp]

so can anyone tell me if they are 100% sure that 4x110 is the right size?

[84honda 200X]

I just looked in a spec page on the internet and it is the correct bolt pattern.