PDA

View Full Version : where can i get a 12 tooth sprocket for my 350x?


X350X
05-22-2004, 02:00 AM
well stoped in at the local cycle shop and they looked at me like i was speaking greek when i asked if they had a 12 tooth for my X. they said 13 is stock. and the upgrad is 14. then the guy said he cant get a 12 tooth cause they dont make one. i told him that they do and he looked in some other book and says that it would have to be made and it would take several weeks to get here.

so anyone know where i can order a new 12 tooth front sprocket for an 86 350x?
200xalltheway
05-22-2004, 12:24 PM
um.......you could try eBay.
drdoom
05-22-2004, 02:02 PM
how about trying at your local bike spares shop to see what sprockets are made for the honda xr350 as the output shaft could be the same size
FireHead
05-22-2004, 04:20 PM
You could also try a catalog like Dennis Kirk or Chapparal.
X350X
05-22-2004, 05:21 PM
i have the Dennis Kirk catalog but its not listed.

does anyone use a 12 tooth out there?

maybe i should just get the 13
FireHead
05-22-2004, 05:24 PM
I'll look and see if I can find a listing for a 12.
TexFest
05-22-2004, 06:23 PM
Give SideWinder sprockets a call and they can make you one.
X350X
05-22-2004, 07:25 PM
thanks guys
FireHead
05-22-2004, 08:23 PM
Speaking of Sidewinder sprockets. Have you seen their new bi-metal Stealth sprockets? They are so bad ass.
FireHead
05-23-2004, 01:32 AM
James Lucky has Sprocket Specialties 11, 13, and 15 tooth front sprockets available.
X350X
05-23-2004, 01:54 AM
ill check them out thanks alot
250sxer
02-07-2005, 10:54 AM
i have the Dennis Kirk catalog but its not listed.

does anyone use a 12 tooth out there?

maybe i should just get the 13


My buddy has an 11 tooth on his 350x. He runs 25" super swampers so he needs it. I am also looking for a 12 tooth. I'll use an 11 if I can't find it.
Let me know if you do......12 is what I want.
StangLX302
02-07-2005, 12:13 PM
I'm 99% sure a 200x sprocket will fit it. My nephew had a 200x that had a stock 350x sprocket on it. Search on eBay for 200x sprockets and look at the pictures.
JLurch58
02-07-2005, 12:35 PM
I have been using Rebel Gear. They made my 39 tooth rear for my R. They told me they can make any sproket I wanted, and If I remember mine only cost about 22 bucks or so. If not call Botson Cycle(atv,atc salvage yard) at 740-432-4610, Bob has always been able to help me with my hard to find parts.
4cylinders
02-07-2005, 01:33 PM
hey, try sprocketspecialists.com they show 11 to 16 for honda atc 350x. that's where I get mine.
trikezilla
02-07-2005, 07:06 PM
hey, try sprocketspecialists.com they show 11 to 16 for honda atc 350x. that's where I get mine.

I have a 42t for my R from these guys. Its reversible and is an alloy...by reversible i mean when you wear the teeth out in one direction, you simply flip it around. IT HAS WORKED GREAT!! i have smoked many rocks w/ it too. it is claimed to be "self cleaning too" iono what that means, but i would put it against any sproket out there--well i have had great luck w/ them to say the least