front brake on 110?

[yater]

I've seen this before but can't remember where. Has anyone done this here? I'm trying to figure out how much of the 125m I'll need. I'm assuming axle and hub with drum at least. Will it fit on the 110 fork? It would be nice to have that front brake since most of the riding I do on the 110 is slow speed crawling type of stuff. Thanks, Yater--oh, it's an '82 110 if it matters

[yater]

I'm working on getting the hub/axle/drum right now. Can anyone tell me if I'll need the fork too? I see a "notch" on the inner left side (brake side) of the fork on the 125 which the 110 doesn't have. Does the drum float on the hub or is that notch there to hold the drum in place?

[TheOlderFox]

If there is a notch, then that is needed to keep the brake from rotating when you stop. Size wise, the axle and hub should fit between the 125 and 110, but you do need that notch in for fork, so I would say you need the whole 125 front end.

[yater]

ok, I've located a whole front end for the 125m. Will it interchange with the 110? Can I just drop the fork in without any modification?

[hondatrikesrule22]

The front end will just drop in. ;)

[yater]

alright done. Thanks--have you done this swap? Any pics?

[hondatrikesrule22]

Yes I have.You are talking about an 84' front end right? No pics,sorry. thanx

[yater]

The 125m is an 84. The 110 is an '82. Sound ok?

[hondatrikesrule22]

It will just slide right in,and you willl have the option of a square headlight! :D Enjoy your front brakes! Oh yeah, good luck getting all the lose ball bearings back in the fork neck. :D

[yater]

I've already got a square headlight. I thought the '82s all did? I've dealt with those bearings before. 5 gallon bucket underneath to catch those little bastards and plenty of grease to hold 'em back in place

[yater]

Well I bought a 125m fork and rim but I was outbid on the damn hub/drum for the 125m. I've been told that the 185/200s drum will work. What else do I need? Will my 110 axle match up with a 200s/185s hub/drum?