jah5207
03-25-2004, 08:55 PM
Okay trying to finish up a restore- It ran when I bought it - sat up about a year and completely dismantled and put bake togother.
I have no spark- ignitor and exciter ohm is ok. the primary coil might be bad- it reads .6 to .7 and supposed to be .16. Secondary coil seems in range. I can't get a ohm reading right on cdi but the manual says that I need a special meter.
any suggestions or just start with the coil.
thx
jamie
I have no spark- ignitor and exciter ohm is ok. the primary coil might be bad- it reads .6 to .7 and supposed to be .16. Secondary coil seems in range. I can't get a ohm reading right on cdi but the manual says that I need a special meter.
any suggestions or just start with the coil.
thx
jamie