TRI-Z/Banshee/Blaster/Warrior rims?

[Groundworx]

Does anyone know the bolt patterns of the TRI-Z, Banshee, Blaster, and Warrior. I have an 85 Z and it has wheel spacers on it. I was wanting some different rims, but I don't know if any of the patterns on these quads are the same. 4x100 is what is printed on my spacers. I am looking on Ebay for some polished wheels for my Z and I was wondering if any of these will cross..

[twgranger]

Blaster will work. Don't know about the rest.

[Groundworx]

That is what I thought. I seen that the Blaster has a 4/100. Just wasn't sure about the rest? Does anyone know what the pattern is on the Banshee, Ratpor, YFZ, Warrior?

[TimSr]

The others are not the same, only the Blaster is 4/100.

[Groundworx]

If I get a deal on some rims from a Banshee, will the hubs fit on my axle. I heard they would, but I would like to double check. I have heard of people putting a Banshee axle in the Z so I guess the hubs from a Z will fit a Banshee right?

[TimSr]

The Banshee axle and/or hubs will fit the TriZ

[Groundworx]

Do you know about any other models crossing?

[Dynofox]

Banshee, warrior, raptor and most likely yfz hubs will fit. The warrior, raptor and newer banshees use a 4x115 bolt pattern. I'm not sure if the yfz still uses yamies 4x115 pattern or not. I had raptor hubs and banshee rims on my Z for awhile, they were then on my brothers blaster for a bit.

[Groundworx]

All of those hubs will fit. I did quite a bit of research on it today. I have been looking on ebay and there isn't a very good selection of Blaster and TRI-Z rims. There are a lot of Banshee, Warrior, Raptor, and YFZ rims with tires. Lost of new take offs and paddles too. I am going to just switch the hubs out and get a set of nice dirt tires and a set of paddles. I am on a tight budget so I am looking at used rims and tires.

But you can put any of those hubs on and have a ton more options when it comes to used rims and tires.