PDA

View Full Version : Tim Sr.?


nitekrawler
03-07-2004, 09:22 PM
You were helping me awhile back and said I probably had Banshee hubs and were 4x115 since they measure 4.5" from hole to hole for rear rims. I found this and it doesn't show Banshee rims with 4x115. Can you help again?? Maybe you meant Yamaha Raptor? The reason for asking as you can see I am looking for wheels/tires for son's Atc (His aren't stock hubs)
http://www.highlifter.com/tirewheel_list.php3
TimSr
03-07-2004, 10:16 PM
That chart is totally wrong. They only used 4/156 in the rear in 89-90.

4/115 = (Rear on all) Warrior 87-03,Banshee 87-88 and 91-03, Raptor 01-03, also almost all years Arctic Cat. I dont have any 04 data, but I believe they are the same.
nitekrawler
03-07-2004, 11:42 PM
That chart is totally wrong. They only used 4/156 in the rear in 89-90.

4/115 = (Rear on all) Warrior 87-03,Banshee 87-88 and 91-03, Raptor 01-03, also almost all years Arctic Cat. I dont have any 04 data, but I believe they are the same.

Thank you :-D
BLAZERONE22
03-08-2004, 12:28 AM
Why don't you just go with a set of 200x hubs? I've seen them on ebay for around 30 bucks. Mine are swapped out and now I can use my paddles off my 350x on the R. Just a thought.
nitekrawler
03-08-2004, 12:39 AM
My other Atc is 4x130. So I can't swap them anyways right?
BLAZERONE22
03-08-2004, 12:52 AM
bummer, People have told me that the stock hubs on the old 81-82r's are a weak link. I think they said they strip out. I might have a set of old r hubs around, I'll check and if I do I'll send them to you. All my stuff is 4x110 anyway. I have a old westcoast swinger and a extended axle for sale also if your interested. I decided not to install it on my trike, figured it was almost completly original might as well leave it that way. I even have theold hockey mask headlight guard on there.lol The motor on it was just rebuilt top to bottom ready for another 22 years.
nitekrawler
03-08-2004, 04:00 AM
bummer, People have told me that the stock hubs on the old 81-82r's are a weak link. I think they said they strip out. I might have a set of old r hubs around, I'll check and if I do I'll send them to you. All my stuff is 4x110 anyway. I have a old westcoast swinger and a extended axle for sale also if your interested. I decided not to install it on my trike, figured it was almost completly original might as well leave it that way. I even have theold hockey mask headlight guard on there.lol The motor on it was just rebuilt top to bottom ready for another 22 years.

Sounds good. You have a few Atc's I see. We just took them out today. Well, "out" the kids usually go a few houses down and there is 15 +/- acres open there. Today, their Grandpa (My dad) came by, he bought a quad and trailer and we went out (20 min) away. There was over 100ppl and only saw maybe 2 Atc's there. Anyways, kids had a blast! Dad got a 4 stroke 250, so the kids were running circles around him :shock: He came back and said that quad is Grandma's (My mom) now, he wants a bigger one 400ex at least, LOL!!!!! Kids laughed ALL day about it