PDA

View Full Version : Need help with 84 200s



short4stuff
03-07-2004, 07:51 PM
It is idleing way to high ... its not the idle screw and i changed the needle setting .... its running lean, whats wrong ?/ could it just be the air/fuel screw?

yamaha225dx
03-07-2004, 07:59 PM
check for air leaks. spray some carb clean around your intake boot and other places to see if you have a leak..

short4stuff
03-07-2004, 08:02 PM
check for air leaks. spray some carb clean around your intake boot and other places to see if you have a leak..

ok well how will i tell if it has a air leak ?/ what will the carb cleaner do ?

yamaha225dx
03-07-2004, 08:07 PM
sorry, It should make it idle better or differently....

short4stuff
03-07-2004, 08:34 PM
alright i think you are right, went and had a closer look and there is some mud on the cylinder/intake seam and its kinda wet a little looks like some gas leaked .. i have another intake so i will try that
do you recommend putting some silicon?

smokinp
03-07-2004, 11:34 PM
Make sure that the throttle spring is not bent or twisted since you had it off.

rob0781
03-08-2004, 02:59 AM
hey chris how do you like the new trike??

short4stuff
03-08-2004, 06:49 AM
hey chris how do you like the new trike??

Hey, I like it a bit, its alright, I dont like the hugh tires though, its gonna flip easy. stocks are 22" and these are 25" the front tires hits the fender and looks to far ahead, also it hits the forks abit.

Is georde gonna get a 350x ?

rob0781
03-08-2004, 05:31 PM
:-D :) :-D :) :-D :) :D :D :D :D :D :D :D :D :D :D :D :shock: :-D :) :D :D :D