PDA

View Full Version : 200es Pull Start Only.



brobones
11-06-2023, 10:31 PM
Hi guys,
All of a sudden my bike electric start will not work. I can pull start it just fine. I tested the starter it works just fine. The battery is fully charged. When I attempt to electric start I hear a click near the battery box. My green light is on the steering column. If I put the bike in reverse the red light comes on as well. With the green light on it would indicate to me that the neutral switch is working. Any info would be great appreciated. Thanks in advance

shortline10
11-07-2023, 05:34 AM
Sounds like your starter solenoid is bad .

brobones
11-07-2023, 10:24 AM
Sounds like your starter solenoid is bad .

Thanks for the response, I have one ordered. If I add power to my starter directly it will start the bike. So I am pretty certain you are correct. By doing this I by pass the solenoid which IMO does isolate the solenoid/relay as the problem.

brobones
11-14-2023, 01:51 PM
Installed a new solenoid and it fired right up.....Thanks again for your response