Options for a 300r head?

[gimmeamidget]

I am having a difficult time locating a head for a Hondaline 300r kit at a reasonable price. Is there any other options that fit?? The air cooled cr480 heads look similar. Any help is appreciated.

[christph]

I assume you're checking ebay? Try air cooled 250R facebook groups. I regularly see 300R kits and parts on there.

[sledcrazyinCT]

FB pages might be of help. Ethan Bennet or John Robertson have fooler parts. Also if you have a shop local you could find a pitted head that could be redomed

[atc300r]

Get a 350 Pilot head or a cr 480 head and have it redomed to fit with your piston size.A few guys have done it.I think OlDeuce did a 480 head for someone a few years ago.

[gimmeamidget]

I don’t know how to Facebook but I will look into a fl350 head. Thanks for the help guys!

[pipeline triker]

You will need a 300 honda line head all others are 6 studs. They come up for sale way more often than the cylinders . last one I sold was $200 which is about the going rate give or take. 81-82 and 83-84 are differant fins, 2nd gen ones are shorter to clear the pipe. either will work on a first gen but only short on the 2nd.

[dieseldigger]

You will need a 300 honda line head all others are 6 studs. They come up for sale way more often than the cylinders . last one I sold was $200 which is about the going rate give or take. 81-82 and 83-84 are differant fins, 2nd gen ones are shorter to clear the pipe. either will work on a first gen but only short on the 2nd.

CR 450/480 and FL350 ARE 7 stud cylinders/heads. Not 6.

[gimmeamidget]

Fl350 head is 7 stud and bolts right on. I haven’t put in bike yet and may have some small clearance issues but seems to work well otherwise. Thanks for the help guys!