tri z crank rebuild kit where to buy??

[Trikeaholic]

I took my crank to a small shop. his catalogs dont list a rod kit. I told him I bet I can find a source before you can! Prove me right! I want to avoid the stealership. a manufacturer and part number would be fantastic!

[samster143]

I took a look in my Wiseco catalog...Found nothing in the way of rods or cranks. You may be limited to genuine Yamaha.

[TimSr]

Ive got one with a Hot Rod, but it was in it when I got it. I dont have a PN#, and Id have to tear it down to get it!

[CHAINSAW]

1 38W-11631-01-94
PISTON STD (38W-11631-00-94) 1
2 38V-11610-00-00
PISTON RING STD (STD) (25Y-1161 1
38V-11610-10-00
PISTON RING 1ST OS (1ST O/S) (2 1
38V-11610-20-00
PISTON RING 2ND OS (2ND O/S) (2 1
38W-11635-01-00
PISTON 1ST O/S .25 (38W-11635-0 1
38W-11636-01-00
PISTON 2ND O/S .50 (38W-11636-0 1
3 214-11633-00-00
PIN, PISTON 1
4 93450-19052-00
CIRCLIP, INNER 2
5 93310-418E9-00
BEARING, CYLINDRICAL 1
6 38W-11400-00-00
CRANKSHAFT ASSY 1
7 38W-11412-00-00
CRANK 1 1
8 38W-11422-00-00
CRANK 2 1
9 2X4-11681-00-00
PIN, CRANK 1 1
10 24Y-11651-01-00
ROD, CONNECTING 1
11 93310-425N4-00
BEARING, CYLINDRICAL 1
12 90209-25085-00
WASHER, (90209-25220) 2
13 93306-20627-00
BEARING (B6206C3) 1
14 93103-30150-00
OIL SEAL (38W) 1
15 90280-03017-00
KEY, WOODRUFF 1
16 93306-20627-00
BEARING (B6206C3) 1
17 93103-40091-00
OIL SEAL 1
18 90201-12593-00
WASHER, PLATE 1
19 92901-12100-00
WASHER, SPRING 1
20 90170-12347-00
NUT, HEXAGON

[Billy Golightly]

I have been told a Niks aftermarket rod from an 84-86 YZ250 will work but I cannot confirm it.

[Trikeaholic]

chain that looks like factory stuff.........no thanks $$$$$$$

Unless that is my only option :x

[YTZ250#1]

Try to go to www.TJPARTSXPRESS.com
it says that the83-89 yz250 takes the same rod.They have rod kits from vesrah,#rd4001 $74.99,pro-x,#rd141$83.99,hotrod,#rd7302$83.99
Theese kits come with all bearings washers and pins.
Or send the crank to Gt Thunder and have him rebuild it for $125,that includes the new rod and labor to install it. Good luck

[Trikeaholic]

now thats good info, thanks!

[CHAINSAW]

cheap skate! :D come on.. buy some gold plate yami parts!

[03 ORANGE SHEE]

i had mine rebult at my dealership for $110,including parts and labor,my rod was good though,the only part i didnt need

[gasmask]

Try to go to www.TJPARTSXPRESS.com
it says that the83-89 yz250 takes the same rod.They have rod kits from vesrah,#rd4001 $74.99,pro-x,#rd141$83.99,hotrod,#rd7302$83.99
Theese kits come with all bearings washers and pins.
Or send the crank to Gt Thunder and have him rebuild it for $125,that includes the new rod and labor to install it. Good luck I WILL CONFIRM THIS...I HAVE THIS ROD KIT IN MY TRI-Z...

[TRI-Zbrian]

both dennis kirk and wiseco have crank rebuild kits