200X/350X carbs

[85 200X]

Does any one know if a 350X carb (any year) will bolt up to a 85 200X? I'm assuming the 350X has a bigger carb. Thanks

[86waterpumper]

don't know whether you could bolt it up or not, but I don't see the point, the carb is like 10 to 12 mm bigger than the 200x. You would have to have a SERIOUSly built 200x motor I don't think you build one beefy enough. I just read a article last night in my old dirtwheels on the curtis sparks powroll 200x's from 85 and 86 and they both were running high compression pistons with a bigger bore, lots of exhaust and intake porting, longer crank, racing cam and exhaust and they still only had a 28mm mikuni on them. Stock 200x is 22 or 24, and 350x is 34 I believe.

[Da_Catt]

there is no room in the frame. I think i tried to use a 350x carb on my 85 and the frame was in the way. i think it is 32mm and stock 200x is 24mm.