125m carb bowl drain O-ring needed

[Baba Yaga]

Got a carb leaking at the bowl drain screw. Anybody know of an O-ring that will work?

Honda only seems to sell 16010-943-305, which is a kit of the bulk of the carb's gaskets. I might order one anyway, but thought I'd check to see if there's something that may work.

Thanks!

[TexFest]

Jetsrus.com might have it without having to order a whole kit


Sent from my iPhone using Tapatalk

[El Camexican]

You’re talking about a rubber o-ring that fits into a groove on a bowl drain plug? If so, anywhere that sells o rings, like Auto Zone, O Riley’s, etc should have them. Might need to buy a kit, but that wouldn’t cost much more than a single one shipped from Jetsrus. Ask for Metric Nitrile.

[Baba Yaga]

It's the one that seals the little drain screw on the side of the bowl, that empties through the tubing. I have an O-ring kit, but none are that small unfortunately. I'll look for a kit with mini sizes!

[El Camexican]

It's the one that seals the little drain screw on the side of the bowl, that empties through the tubing. I have an O-ring kit, but none are that small unfortunately. I'll look for a kit with mini sizes!

Reddish/yellow colored paper/fiber gasket/washer? If so that would probably be universal for any carb with a similar design. You could probably cut it out of gasket paper as well.