Atc110 stator test

[renorealtors]

Hi I am trying to test my stator on a 1983 atc110 I am getting 209 OHMS on the black wire and 2.4 on the yellow wire coming from the engine? Trying to find a manual for a 1983 is near impossible! Needless to say I have no spark. When I spin over the motor w/o the spark plug and use a test light I get lots of light on the yellow wire and have to really spin the motor fast to get any light from the test light when hooked up to the black wire? I have a 1981 ATC110 with a stator in it I could pull if needed but don't know if it is interchangeable? like I said I can't find any specs or manual to figure out the test readings. Thank you for your help. Still can't figure out how to download pics onto my threads.

[JustEnough]

This manual seems to have some information for it:

http://www.oscarmayer.net/atc/manuals/honda/atc70-125_1985_and_earlier_servicemanual.pdf

and the others:

http://www.oscarmayer.net/atc/manuals/

[renorealtors]

Thank you for the link!! I will post the results of the tests in the manual.

[renorealtors]

I was fortunate to have a parts bike to swap out every electrical part to see it I would get spark? After all that I think it was a bad spark plug?? Just in case others have the same "no spark issue" No matter how nice the plug looks try another one!