Aftermarket exhaust that will fit 84 200M

[BarnBoy]

My original plan was to modify a 200X supertrapp to use on my 200M. Well, I'm running out of time and patience. Used to be able to find DG pipes pretty reasonable on eBay, but everywhere i look they're out of stock?? I wonder if they discontinued them?? I believe the part number is DG 04-2107?? Anyone have one or know where to find one, or a nicer option the would fit either a 200E Big Red or 200M??

Thanks
Thanks

[350for350]

Be careful. With a DG on it, you won't be able to sneak up anybody.:lol:

[BarnBoy]

Well I know and I don't really want that. But I'm at the point where I just need SOMETHING that will at least flow better than stock. Even if I only use the DG head pipe and modify a supertrapp to fit later, that may work. Just don't have the time to custom build a header and all that.

[ATC King]

While not a full system, this may suit the bill.

https://cdn.kimpex.com/web/364/080/080314.jpg?v=1
https://www.kimpex.com/en-us/products/atv/exhaust/slip-on-exhausts/mbrp-powersports-utility-slip-on-exhaust-fits-honda?sku=080314&categoryid=2e089b7e-3c21-4836-abfe-0393858f8e52&makeid=a584351d-30c4-49b3-b8cb-0236f1003128&yearid=c325a726-100b-4536-be65-d1ea8ad5440c&modelid=198f049d-ccfb-4d32-a950-fac785a75ec6

Really, the stock headpipe is nice because it's double walled which keeps it cooler on the outside. Those thin walled aftermarket exhaust like DG can get pretty warm on the leg in the summer.

[BarnBoy]

While not a full system, this may suit the bill.

https://cdn.kimpex.com/web/364/080/080314.jpg?v=1
https://www.kimpex.com/en-us/products/atv/exhaust/slip-on-exhausts/mbrp-powersports-utility-slip-on-exhaust-fits-honda?sku=080314&categoryid=2e089b7e-3c21-4836-abfe-0393858f8e52&makeid=a584351d-30c4-49b3-b8cb-0236f1003128&yearid=c325a726-100b-4536-be65-d1ea8ad5440c&modelid=198f049d-ccfb-4d32-a950-fac785a75ec6

Really, the stock headpipe is nice because it's double walled which keeps it cooler on the outside. Those thin walled aftermarket exhaust like DG can get pretty warm on the leg in the summer.

Good point, however they also seem very restrictive to flow. To me anyway, I know too small or large is bad...but I want something I bit bigger than stock. May need a heat shield or wrap though. Not super excited about a wrap but may need to do it.

[BarnBoy]

Update: found a header I didn't know I had, turns out with a lot less cutting and welding I could make it fit almost perfect on the 200M.

268652

268653

268654

268655

268656