atc 200es regulator plug wiring

[robgdds]

I'm trying to wire up an atc 200es regulator to a 185s and need help with the plug. I know the red goes to the battery, the green goes negative of the lights or green from stator, I don't know. Then I'm left with 2 yellow wires, which goes to stator and which goes to lights.

Below is a link to the regulator
https://www.ebay.com/itm/363382283893?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1KLczDfsqRB-7jWRpis8plg33&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=363382283893&targetid=1262906534562&device=c&mktype=pla&googleloc=9030009&poi=&campaignid=12873833206&mkgroupid=123950846602&rlsatarget=pla-1262906534562&abcId=9300536&merchantid=426117822&gclid=Cj0KCQiA-K2MBhC-ARIsAMtLKRv5Xbs3VOqb-oIhXXTC_rDDVOCt6GloiPUjzPIYTRAGWgB_S0kQgZUaAjykEAL w_wcB

[ATC King]

I may help you if you can be more specific about what your intended use is.

You'll need a battery or capacitor when using that rectifier/regulator and to make a wire harness that goes from the stator to the rec/reg then back to the main harness.