200X camshaft

[87Cat]

New to the thread, cool info. I am looking for a 86 or 87 camshaft for a little more giddy up. Any help would be appreciated. New or used tried to post a pic from my iPad couldn't get it to work do pics have a url?

[87Cat]

I think it worked

[87Cat]

http://www.3wheelerworld.com/album.php?albumid=2939

[ironchop]

Try Web Camshaft or Megacycles. They might offer one for that model. They both offer cams for 83-85, but I'm not sure about 86-87 X

[87Cat]

img 0032img 1159
Try Web Camshaft or Megacycles. They might offer one for that model. They both offer cams for 83-85, but I'm not sure about 86-87 X

Thanks I checked into both of them. Im looking for a good used 86 or 87 cam to grind.

[87Cat]

New to the thread, cool info. I am looking for a 86 or 87 camshaft for a little more giddy up. Any help would be appreciated. New or used tried to post a pic from my iPad couldn't get it to work do pics have a url?

http://www.3wheelerworld.com/attachment.php?attachmentid=267678&d=1622491622

[87Cat]

New to the thread, cool info. I am looking for a 86 or 87 camshaft for a little more giddy up. Any help would be appreciated. New or used tried to post a pic from my iPad couldn't get it to work do pics have a url?

http://www.3wheelerworld.com/attachment.php?attachmentid=267679&d=1622491707

[87Cat]

http://www.3wheelerworld.com/attachment.php?attac

[87Cat]

http://www.3wheelerworld.com/attachment.php?attac. Torn apart

[87Cat]

http://www.3wheelerworld.com/album.php?albumid=2939&attachmentid=267678
Pic

[87Cat]

Has anyone ran a .335 or .345 lift on their cam. I see .355 is a mega cycle option.

[Dirtcrasher]

I've ran numerous different grinds from White Bros to Megacycle to Webcamshafts.

One was for trails, one was mid range, one was WOT race cam etc, they all have a purpose...

[87Cat]

So I am going to install this in a fatcat with wb 234-h springs. Don't want to sink the valves. Have a new head, valves and rockers all Honda. Do you have to run hardened rockers with a mega cycle cam? Do you have any powrolls laying around that you would part with? I think I'm going to shoot for .355 lift, or a little shorter if a used cam is available. I use it in the mts a lot up to 10000 ft.

[Dirtcrasher]

I can't part with much anymore, costs me more money to replace what I sell and things have been drying up for a couple years now.

Yes, if you buy a hard welded cam you are suppose to harden the rockers. You also have to run the heavy springs and collar/retainer set.

But, to be honest with you, I have always had NOS rocker arms and I run good oil and change it often. I am yet to see any wear whatsoever on the cams or rocker pads.

These camshaft companies will make you whatever lift/duration/separation of lobes etc you want. But, this time of year they are often backed up quite a bit, especially after everything being shut down last year for Covid BS.

EDIT - I was told that the Fat Cat, 200X and 200SX quad did not have the exact same camshafts, I can't offer any additional info though, just sharing what I was told.

[87Cat]

I can't part with much anymore, costs me more money to replace what I sell and things have been drying up for a couple years now.

Yes, if you buy a hard welded cam you are suppose to harden the rockers. You also have to run the heavy springs and collar/retainer set.

But, to be honest with you, I have always had NOS rocker arms and I run good oil and change it often. I am yet to see any wear whatsoever on the cams or rocker pads.

These camshaft companies will make you whatever lift/duration/separation of lobes etc you want. But, this time of year they are often backed up quite a bit, especially after everything being shut down last year for Covid BS.

EDIT - I was told that the Fat Cat, 200X and 200SX quad did not have the exact same camshafts, I can't offer any additional info though, just sharing what I was told.

Yes you are correct. The lifts are different on all three models. I do have a new set of bearings for that cam and also a r/d spring kit titanium for 83-85 200x, part #228H if anyone is interested in trading parts for a new or used 86 87 200x camshaft.

[87Cat]

Has anyone ran the white bros w2000. When they weld the sprocket back on the cam is the timing advanced?