PDA

View Full Version : 85 250r Voltage Regulator Rubber Mount


jasong_10
05-07-2021, 11:09 PM
When my buddy and I put my R together it was missing the rubber mount so we improvised by bending the frame tab so it pointed down, drilled a hole matching the hole in the regulator, and bolted it on. Well, checking it over yesterday I discovered that I lost the bolt/nut sometime last summer. So I decided to look into getting one of the rubber mounts before just replacing the bolt/nut.

There are a couple on Ebay for around $30, which isn't terrible, but I wanted to check here to see if anyone re-pops them or has one kicking around?

The Honda part number is 30406-HA2-000

Thanks all.
Red Rider
05-08-2021, 02:17 AM
I'm pretty sure I have an old one stashed away. I replaced the original about 7-8 years ago, when I was placing a large order with Service Honda. It had a slight tear in it, so I bought a new one. The old one is still useable, just slightly compromised. Let me see if I can find it.
Red Rider
05-08-2021, 11:53 AM
I found it. As you can see, it has two 1/4" tears on one side, and two 1/8" tears on the other side of where it slides onto the mounting tab. It was that way for many years on my bike, and never seemed to get any worse. If you can't find a better one, PM me your address, and I will mail it to you.
atc300r
05-08-2021, 08:04 PM
Jason ,I'm thinking about buying a new cdi cushion the regulator fits in it perfectly. Cdi cushion on bottom, regulator cushion on top.Im going to order #1 in second pic.Its for the 86 atc 250r.Pic is from partzilla.267525 267526
jasong_10
05-08-2021, 09:15 PM
I found it. As you can see, it has two 1/4" tears on one side, and two 1/8" tears on the other side of where it slides onto the mounting tab. It was that way for many years on my bike, and never seemed to get any worse. If you can't find a better one, PM me your address, and I will mail it to you.

Okay, will do. Thank you.
jasong_10
05-08-2021, 10:10 PM
Jason ,I'm thinking about buying a new cdi cushion the regulator fits in it perfectly. Cdi cushion on bottom, regulator cushion on top.Im going to order #1 in second pic.Its for the 86 atc 250r.Pic is from partzilla.267525 267526

Okay, thanks for the info. Are you getting a new one because yours is damaged?
atc300r
05-09-2021, 07:32 AM
The one I have is hard as a rock and is starting to crack .I boiled it in hot water to soften it didn't work.It will split if I try to put it on the tab.Im going to call Lowville Honda tomorrow and order maybe 3 of them.The one on my other 85 250r is cracking also.
jasong_10
05-09-2021, 09:24 PM
The one I have is hard as a rock and is starting to crack .I boiled it in hot water to soften it didn't work.It will split if I try to put it on the tab.Im going to call Lowville Honda tomorrow and order maybe 3 of them.The one on my other 85 250r is cracking also.

Gotcha. When you get them and get them on, snap and post some pics. That might be the route I go, looks like they can be had for a lot less than the actual replacement.