ATC 350x rear master

[BOB MARLIN]

This has been gone over many times but I still don't see something that we all agree works.
Has anyone found a good fitting and functioning replacement for the 350x rear master ?. I've been using the master from a 250r for years but now they are scarce. I'd like to hear from some of you that have successfully used something from a more modern bike or quad. I found on of a Yamaha dirt bike that looks close but it hits the exhaust.

[oldskool83]

2006-2009 KAWASAKI ninja 650R, bolts right up. you need to drill out the tapped holes in the cylinder for thru holes and add a washer behind each tab. That's all. I just put one on mine. $11.00 shipped lol

[sledcrazyinCT]

2006-2009 KAWASAKI ninja 650R, bolts right up. you need to drill out the tapped holes in the cylinder for thru holes and add a washer behind each tab. That's all. I just put one on mine. $11.00 shipped lol

Got a pic of it installed to share?


Sent from my iPhone using Tapatalk

[Dirtcrasher]

I've always just bought anything Japan made that's close and made a bracket.

The YZF seemed to work fine by just opening up one hole.

I'd have to search for the proper year but I'm running one of those on one 350X and some random model on another.

[oldskool83]

Yes. Just drill out for m8 thru hole add a washer and go about your day.

[KASEY]

late model yz450 works perfect, it doesnt get in the way of anything and has its own rezz,,,, 267209

[oldskool83]

Looks like its in the way of the exhaust bolt or just an illusion?

[BOB MARLIN]

late model yz450 works perfect, it doesnt get in the way of anything and has its own rezz,,,, 267209

Hey KASEY, long time !
When you say late model are you saying aluminum framed ?. I looked at the master that's on my wr450 and it looks like it might bolt up, have you tried any of those ?.

[Arky-X]

late model yz450 works perfect, it doesnt get in the way of anything and has its own rezz,,,, 267209

Are the bolts coming through the back side?

[KASEY]

No its far enough away ,

[KASEY]

it has studs in the master the 6mm nuts fit in behind the original mounts , no drilling or removing the original threads either.

[KASEY]

Hey KASEY, long time !
When you say late model are you saying aluminum framed ?. I looked at the master that's on my wr450 and it looks like it might bolt up, have you tried any of those ?.

yes 06 or newer master, perfect fit.

[Arky-X]

it has studs in the master the 6mm nuts fit in behind the original mounts , no drilling or removing the original threads either.

Thanks Kasey....makes sense
I saw you post this several years ago and made a note of one of these fitting but could not picture what you did to attach it.

Also made note you used an XR400 headpipe on a 350X......I think that was you????

[KASEY]

thanks kasey....makes sense
i saw you post this several years ago and made a note of one of these fitting but could not picture what you did to attach it.

Also made note you used an xr400 headpipe on a 350x......i think that was you????

yes you are right

[KASEY]

Better pice together


267325

[BOB MARLIN]

Take notice that's a 350x with prolink and inverts !.
All while being told it couldn't be done.
Nice job Richard !.

[KASEY]

Take notice that's a 350x with prolink and inverts !.
All while being told it couldn't be done.
Nice job Richard !.

at this point in the trikes life i think there is probably not another 350x anywhere that has as many racing miles on it or wins!!!! we estimate 4000 desert racing miles, i have rebuilt the motor 4 times rebuilt the rear suspension twice and now for the first time the front forks, at this time its fresh has another owner and is going to return to the desert racing circuit . this trike is flat amazing what it has done ands where it is still going .

[BOB MARLIN]

Did Dave hang it up, or just pass the trike along ?.

[KASEY]

Did Dave hang it up, or just pass the trike along ?.

dave is now riding a 450 trike, the 350x passed on to a new owner, and it will be ridden as fast as ever