ponderinjunkman
01-21-2021, 06:58 PM
Further progress on the scrap 110. It just seemed too narrow. So wheel spacers were checked into. Seems like they could be easily made, but the required aluminum isn't cheap! So the durablue spacers were found on ebay for about what raw aluminum could be had for. No brainer, right? Well, Not exactly a bolt on. The bolts holding together the 2 piece rims needed to have clearance cut into the spacers. The hubs and rims had to be drilled bigger for the included bolts. There were no nuts included with the spacers, and the bolts were too long, so spacers had to be made (for the spacers!!) But it still seems worth it, as the wheels are now properly spaced!
I know I forgot to take the pictures with proper orientation!!
I know I forgot to take the pictures with proper orientation!!