frauke75
01-20-2021, 06:50 PM
I was excited to finally upgrade my 1985 250es Big Red with upgraded rims and tires I have been dreaming about for a long time.
I went with the 12x7, 4/110, 2+5 ITP Delta Steel Wheels. I think originally introduced and well documented by dougspcs (he just said his good buys to the site a few months ago otherwise I would ask him... but he had the “Back in Black Trike“ - looks so Bad trailprotrailprotrailprotrailprotrailpro).
I thought this was often replicated by others on this site. He had said that this setup was correct for the front wheel offset (no spacers needed). and like I said... others did this too (or at least said they wanted to).
I have never mounted a front tire on the trike before... but it is pretty strait forward, so I guess I am just double checking... because my install did not come out dead center. (Yes the factory spacer is on the axle)
The non-brake fork is about a 1/2” tighter to the rim compared to the break side fork.
I guess its going to be fine as is but … just thought I would see if anyone sees anything stupid I did wrong. … or is the brake side always further away than the other?
Have a look and let me know... and thanks for any input or suggestions.
I went with the 12x7, 4/110, 2+5 ITP Delta Steel Wheels. I think originally introduced and well documented by dougspcs (he just said his good buys to the site a few months ago otherwise I would ask him... but he had the “Back in Black Trike“ - looks so Bad trailprotrailprotrailprotrailprotrailpro).
I thought this was often replicated by others on this site. He had said that this setup was correct for the front wheel offset (no spacers needed). and like I said... others did this too (or at least said they wanted to).
I have never mounted a front tire on the trike before... but it is pretty strait forward, so I guess I am just double checking... because my install did not come out dead center. (Yes the factory spacer is on the axle)
The non-brake fork is about a 1/2” tighter to the rim compared to the break side fork.
I guess its going to be fine as is but … just thought I would see if anyone sees anything stupid I did wrong. … or is the brake side always further away than the other?
Have a look and let me know... and thanks for any input or suggestions.