Rear brake drum seized on 84 atc 110

[Bucannon]

I got my rear bearing carrier removed and i cannot figure out how to get the brake drum unstuck? Any suggestions?

Im thinking maybe use a blind bearing puller?

I posted pictures in the 3WW facebook page.

[floydechoes2000]

My buddy welded two nuts on the drum and used two threaded rods and a metal plate with two holes in it over the axle end like a giant puller, and it still took plenty of PB Blaster and heat to get it free but eventually it did come off. Good luck!

[Bucannon]

https://www.facebook.com/264719198314/posts/10157831445768315/

This is the link to see the pictures

[ATC King]

That's a horse of a different color.

It looks different than most of the time, when people ask that and the axle is still in.

Violence is at your last resort. A large slide hammer with a center puller, and/or lots of hellfire (heat).




It's just stuck on the old brake shoes. Rip it off like a clotted on bandage. Family, marital, work problems? Your relief is before you.

[DAM shop]

https://www.facebook.com/264719198314/posts/10157831445768315/

This is the link to see the pictures
Might be easier to just get another one.

[Bucannon]

Ive looked on eBay and only see the carrier without the drum. Athough i did see a NOS drum listed for $125, id prefer not to go that route!

I'll keep messing with it...

[Bucannon]

I got it! Used Kroil on it and put it in a vice and used a hammet to persuade it off. I think the Kroil did the trick!

[ATC King]

Good deal.

Even if the drum is toast, you're able to use that carrier now.

[DSHOT59]

Kroil is some good stuff.