clutch adjustment

[Macs]

i have a 81 200 atc and the auto clutch slips when i gas it. were is the clutch adjustment. thanks

[catfishwhisker]

It's on the right hand crankcase cover. It's a 14MM nut with a slotted stud in the center. Loosen the nut, turn the slotted stud (flat screwdriver) counterclockwise until it stops. Then turn it in 1/4 turn. Tighten the nut. That's it, your done. If your clutch is still slipping, there's a good chance that you will need to install new ones.

[skippy]

sounds like all of the advice you need! right from the book!

[Macs]

thanks a million. works great