PDA

View Full Version : First pics of X and completed nerf bars


jasong_10
06-03-2020, 10:46 PM
Finally took some pictures of the 200X and put the nets in the nerf bars that I fabbed up. They're not perfect but I'm happy with them and they function as they should.
MrConcdid
06-04-2020, 12:53 AM
I think they look great. outstanding!
MrC.
jasong_10
06-04-2020, 06:56 PM
I think they look great. outstanding!
MrC.

Thanks, I think they turned out pretty well for only having less than $80 in them.
Dirtcrasher
06-05-2020, 04:12 PM
They look great! I use the TRX450R ALBA nerfs on every Honda I have, they are 89.95$ shipped.

The only thing I do different than you is I chop off that front mount and slide a tube into that tube, and then the other side.

Then I weld on 2 - 3" tall ears that pick up the lower engine mount. I powder coat the front mount I make and EMT tube fits in the nerfs tight but perfect! I'll add a picture...
Atc 200x 1985
06-05-2020, 04:18 PM
Very nice! I may have to get some for mine once I get it running.
agedatc
06-06-2020, 04:50 PM
Finally took some pictures of the 200X and put the nets in the nerf bars that I fabbed up. They're not perfect but I'm happy with them and they function as they should.Pretty damn nice all around.

Sent from my SM-G960U using Tapatalk
jasong_10
06-06-2020, 07:57 PM
They look great! I use the TRX450R ALBA nerfs on every Honda I have, they are 89.95$ shipped.

The only thing I do different than you is I chop off that front mount and slide a tube into that tube, and then the other side.

Then I weld on 2 - 3" tall ears that pick up the lower engine mount. I powder coat the front mount I make and EMT tube fits in the nerfs tight but perfect! I'll add a picture...

Yeah, these are Alba's too, except for a KFX 400. Picked them up used for $60, trimmed a little here and there, new nets for $18, and had the hardware in my "odds and ends" bins.
jasong_10
06-06-2020, 07:59 PM
Very nice! I may have to get some for mine once I get it running.

Thanks. I recommend it, it's worth the piece of mind knowing they're there.
jasong_10
06-06-2020, 08:02 PM
Pretty damn nice all around.

Sent from my SM-G960U using Tapatalk

Thanks, I've almost completed phase 1 which is to get 100% complete. Eventually it will get the full teardown/clean/re-paint/new plastic/etc. treatment. That won't be for a while though.