Front Fender ID

[Lanix]

I was looking into getting a new fender for my 83 ATC200, but when I started to look at them they all look different than the one I have currently.
Can anyone give me a positive ID on this fender?
Seems like it might be a 200S fender but I am not entirely sure, If it is that just means that someone has swapped the front end on this ATC sometime in the past and I am just now realizing it...

https://i.imgur.com/uusrGKN.jpg?1

[shortline10]

83 was the first year for front suspension and the reason it looks different .
If you have a 9” front wheel and a 25” tall front tire then that is the original fender .

[atctim]

What is tough in ID'ing it is the size. The ATC200 front fender from 1983 looks nearly identical to the 1984 - 1986 ATC200S and 1983 ATC185S - it's just scaled up as the "S" models had 22X11-8 tires. So with that said - you would have to measure the width of the fender to be 100% certain.

[Lanix]

Thanks guys, If what shortline said is accurate than it is definitely original. I guess the listings on ebay are not accurate, because the pictures are completely different than what I have... I will have to keep looking for one I guess

[shortline10]

I believe the 83 regular 200 is a one year only fender so finding one may be a PITA , an 83/ 84 big red or 200m after 83 fender might work .

[atctim]

Shortline is correct. 1984 and 1985 ATC200M use the identical front fender as the 1983 ATC200. the Big Reds are as different as the 81-82 ATC200 fenders.