200x brake parts?

[Jim mac]

my two new to me 85 200x trikes have brake issues. both front master cylinders are stuck and doeant want to free up. are those Ebay 14 dollar lever resivoirs really a bolt on and go?
the rear brake on 1 is also stuck. I see they sell a resivoir, master and hose for 14 bucks too. are these bolt on and go? thx. jim

[ironchop]

my two new to me 85 200x trikes have brake issues. both front master cylinders are stuck and doeant want to free up. are those Ebay 14 dollar lever resivoirs really a bolt on and go?
the rear brake on 1 is also stuck. I see they sell a resivoir, master and hose for 14 bucks too. are these bolt on and go? thx. jimOR..... This is what I did. It's still quality Japanese components that you can find parts for....

https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2E3wheelerworld%2Ec om%2Fshowthread%2Ephp%3Ft%3D65970&share_tid=65970&share_fid=192465&share_type=t

Sent from my Z958 using Tapatalk

[Jim mac]

I went on Ebay, I think I got the chinese knock off master cylinders for the cr80. ordered a chain, petcock and have a few other parts on my wish list. Probably order a seat cover too. jim

[350for350]

I tried one of those Chinese front maters on my AutoX. I didn't like it. I could see it flex right by the mount. It worked fine, but it had no feel at the lever. Just mushy all the way through the lever pull. I bled it out several times and that didn't help. I needed a rear caliper so I found a CR85 front master, caliper, and brake line all still hooked together on Ebay for about $50. I pulled it out of the box and I could see the piston in the caliper moving as I gently pulled the lever. Caliper on the rear, master on the front, bled both one time and it all works great. The caliper even had more material on the pads than the ones that I already had, so i didn't even have to put new pads on. now it also has great feel at the front lever too. No more Chinese crap for me!

[Jim mac]

just went out and messed with the trike a few minutes ago and got the front master unstuck on one of the trikes. going to top the master off tomorrow and see if I get brakes.
jim

[Jim mac]

well the spring in the original master must be toast. the plunger doesnt return. the China masters showed up last night and was a direct bolt on
now I've got front brakes on both trikes. waiting for the rear master today for the one trike. jim

[Jd110]

Jim, mine was stuck, also. After a soak, it freed right up. Of course, I wouldn’t have known the condition of it without disassembling.
https://uploads.tapatalk-cdn.com/20190822/d226021696000c461058752931e28227.jpg
https://uploads.tapatalk-cdn.com/20190822/6c8a792847c2113ed0faefceb1934c8f.jpg


Sent from my iPhone using Tapatalk