PDA

View Full Version : Stuck front Axle of 1985 125M



Bernard3rd
03-22-2019, 03:48 PM
Hello All,

I'm attempting to tear down the front wheel and brake assembly for my 85 125M. However, I have gotten everything else disassembled, but I am stuck here.

257838


Can anyone tell me how to remove the front axle from the housing/Panel?

Also, my untrained eye thinks that these shoes are shot. Can anyone with a trained eye confirm?

257839


257840


Much Appreciated!

Gabriel
03-22-2019, 04:00 PM
Unless you're on a very tight budget...toss the shoes. $35 will get you front and rear at G&H discount ATV supply.

As for the axle....try to avoid beating it although I have had to do it. Soak it liberally and repeatedly (sometimes for a few days) with a good penetrating oil like Kroil or PB blaster. You may even have to put a little heat to it. You might also try soaking it in a bath of Evaporust for a day or two. Be patient, it was put in there....it'll come out.

ArizonaATC
03-22-2019, 06:26 PM
Unless you're on a very tight budget...toss the shoes. $35 will get you front and rear at G&H discount ATV supply.

As for the axle....try to avoid beating it although I have had to do it. Soak it liberally and repeatedly (sometimes for a few days) with a good penetrating oil like Kroil or PB blaster. You may even have to put a little heat to it. You might also try soaking it in a bath of Evaporust for a day or two. Be patient, it was put in there....it'll come out.

This and I wanted to add that if you beat the axle end use a block of wood on the end so you dont damage it

Bernard3rd
03-22-2019, 10:23 PM
Thanks guys. I appreciate it, and I just happen to have the specific type of oil that Gabriel mentioned.

Bernard3rd
03-22-2019, 10:43 PM
257841

Finally - now removed - much thanks for the suggestions

350for350
03-23-2019, 06:44 PM
That's good news.