Wheel spacers for a big red 200es. 4/150 bolt pattern

[MN250R]

Thinking of adding some kind some wheel spacers to my 84 big red for my wife. Of course I can not find any spacers for the 4/150 bolt pattern. Do they make stud extenders?

Thanks!

[oldskool83]

you don't want a stub extender. have a machine shop cut you 1" spacer ad then add 4 studs in.

[MN250R]

Thanks for the reply, I'll have to look for a shop to make one

[oldskool83]

just draw it in cad send it to a shop its just 8 holes and 1" anyone can make them. you might be able to swap 400ex hubs on it, im not sure if the splines are the same but im guessing they are. gets your better rims too.

[floydechoes2000]

I bought an 83 200E for parts and it had 400EX rear hubs and wheels on it. I haven't looked at it really close but when I test rode it they seemed to fit and function fine.

[MN250R]

I bought an 83 200E for parts and it had 400EX rear hubs and wheels on it. I haven't looked at it really close but when I test rode it they seemed to fit and function fine.


That's good info. Maybe I'll try to find some 400ex hubs if the spline count is the same.