PDA

View Full Version : 350x crank seals


6spdls1z28
09-02-2018, 12:33 PM
I'm trying to get the seal for the left side case and there is 4 different part numbers
#19. https://uploads.tapatalk-cdn.com/20180902/abe5ac9b3d5aaaf62cd8b7e9bdeb5a33.jpghttps://uploads.tapatalk-cdn.com/20180902/6c09829b1d182e842fbdaebda8a844df.jpg

Sent from my XT1635-01 using Tapatalk
Shep1970
09-02-2018, 12:44 PM
There all the same part: 29x45x8 seal. The 91213 is the part# the next 6 digets are make of bike and yr. the part just fits 4 diffeent bikes.

99% of the time anyway....

Shep
Jeez my spelling stinks, I was rushed;)
6spdls1z28
09-02-2018, 12:47 PM
There all the same part: 29x45x8 seal. The 91213 is the part# the next 6 digets are make of bike and yr. the part just fits 4 diffeent bikes.

99% of the time anyway....

ShepOk cool. This number even came up for Honda car engines.

Sent from my XT1635-01 using Tapatalk
Dirtcrasher
09-02-2018, 01:33 PM
Doesn't matter. Sometimes it's a newer part number, other times it cross matches other machines.

Honda uses HA5 HA0 HA2 HB# etc etc, which denotes the type of machine, so a 350X seal that's also used on a 450R, would have 2 part numbers...
6spdls1z28
09-02-2018, 01:54 PM
I also need the oil seal for the front sprocket. The Honda one is discontinued but Kawasaki and Polaris have one the same size do you think it would work?https://uploads.tapatalk-cdn.com/20180902/5ffd293e77ac745808daf325c8b48607.jpg

Sent from my XT1635-01 using Tapatalk
Shep1970
09-02-2018, 03:04 PM
Just get the seal at a regular bearing + seal company——u may need to buy 5 though? That’s what I’ve done in the past for discontinued seals- 254307 http://www.vxb.com/Oil-and-Grease-Seal-TC22x35x8-Rubber-Cove-Lip-w-p/tc22x35x8.htm

That way you’ll know they fit and not from China or other———-

Shep
6spdls1z28
09-03-2018, 05:07 PM
Just get the seal at a regular bearing + seal company——u may need to buy 5 though? That’s what I’ve done in the past for discontinued seals- 254307 http://www.vxb.com/Oil-and-Grease-Seal-TC22x35x8-Rubber-Cove-Lip-w-p/tc22x35x8.htm

That way you’ll know they fit and not from China or other———-

ShepAlright I'll pick up a few

Sent from my XT1635-01 using Tapatalk