Gorjax
08-25-2018, 05:22 PM
Hey guys, im having an issue. Recently i rebuilt the top end of my 200es , new piston/rings/gaskets/valves/spark advancer/camshaft and probably another thing or 2 i forget. Anyways, my decompression lever used to 254146 254145stay up when i flipped it up until i used the pull starter. well the lever wont stay up anymore so obviously i cant pull on the pull start.
Before the rebuild everything worked smooth and fine and the lever would stay up, then reset on each pull. The spring looks to be intact. And i cant figure out how the mechanism would even go on differently. My only thought is something is seated wrong internally near the cam/valves, or there is something mechanically happening that my truck driver brain cant figure out haha . uggg any ideas?
Before the rebuild everything worked smooth and fine and the lever would stay up, then reset on each pull. The spring looks to be intact. And i cant figure out how the mechanism would even go on differently. My only thought is something is seated wrong internally near the cam/valves, or there is something mechanically happening that my truck driver brain cant figure out haha . uggg any ideas?