Need help with my 86 200x

[motoman1012002]

I got somenew rear bearings and seals for it but i dont have a manual for it and i cannt figure out how to get the little clip out then its in the washer axle nut and then the axle nut and the axle lock. Its the first three peices on theright rear of the alxe so i can slide the axle out the other side. And i dotn know how to get if off ther am i just goin to have to order a manual for it

[nitekrawler]

They actually make a clip remover :-D Or I think I used a standard screw driver and hammer 8)

[motoman1012002]

it wont come out with a hammer and a screw drive

[deathman53]

Thats all i used on my honda's, loosened the lock nut, then the main nut and stick a screwdriver to the clip and it should prey out easy. I use a pipe wrench w/ a 3 foot peice of pipe to get them off. To make it alittle easier have a friend sit on the bike and lock the rear brake, maybe even put it in 2nd gear. the nuts are reverse thead.