Stud bolts for 84 250r help?

[ivan-083]

Hey guys my 84 250r has had normal hex bolt and nuts for the rear wheels from the previous owner and just realised once I changed the tires over! Pain in the ass to take off. I want to buy a set and wondering if the 85 or 86 studs would fit straight onto the 84? I have the standard oem 84 rims. Below is a pic from eBay, but I hope my splines aren’t damaged now. Any help or advice would be good. Thanks Ivan
https://uploads.tapatalk-cdn.com/20180731/0baa97543756a431a044ab73fc63532f.png


Sent from my iPhone using Tapatalk

[ivan-083]

Or what hub would replace it if it damaged might be cheaper


Sent from my iPhone using Tapatalk

[Shep1970]

Just get some new hubs, many different hubs fit your axle.
83-85 200x
86-87 200x about 1-3/4 longer than 83-85 200x over all length
300ex
400ex
86/87 trx200sx about the same width as 83-85 200x
250x
A few others too......

I run aftermarket trx200sx alum hubs on this 83/84 250r axle, from outside of hub to out of other its 33-1/2 long.
If I put 86/87 200x hubs on it would be about 35-1/2 long out to outside of hub
253812

I don’t think it’d be worth messing with replacing studs (just get new) you won’t be throwing tools around the shop this way:wondering
Keep your 2- castle nuts for 250r axle though- odd size if I remember correctly
Shep

[ivan-083]

Thanks shep I’ll look into it! Which hub do you think is the best?


Sent from my iPhone using Tapatalk

[ivan-083]

Just get some new hubs, many different hubs fit your axle.
83-85 200x
86-87 200x about 1-3/4 longer than 83-85 200x
300ex
400ex
86/87 trx200sx about the same width as 83-85 200x
250x
A few others too......

I run aftermarket trx200sx alum hubs on this 83/84 250r axle, from outside of hub to out of other its 33-1/2 long.
If I put 86/87 200x hubs on it would be about 35-1/2 long out to outside of hub
253812

I don’t think it’d be worth messing with replacing studs (just get new) you won’t be throwing tools around the shop this way:wondering

Shep

https://uploads.tapatalk-cdn.com/20180731/4a0db7b9d227d078e21df11a8a4c72a7.png
Shep so these will definitely fit?



Sent from my iPhone using Tapatalk

[Shep1970]

Think I pd about -80 - 100 for the set I have, the trx ones u may find them cheaper? Make sure whatever u get come w/studs pressed in. Heading to work:mad:

Shep

[ivan-083]

Thanks shep appreciate the advice


Sent from my iPhone using Tapatalk

[shortline10]

All years 300ex or 400ex hubs are plentiful and cheap on eBay and will give you about 1 3/4” extra width which is a plus .

[ivan-083]

All years 300ex or 400ex hubs are plentiful and cheap on eBay and will give you about 1 3/4” extra width which is a plus .

Thanks short line! I’ll buy 300ex or 400ex then


Sent from my iPhone using Tapatalk

[Shep1970]

Here’s my old email- pd 49x2. So $100
Email pic is long gone, but yes they fit axle splines perfectly
253813

Shep