PDA

View Full Version : Tank strainer question



cainesy
03-14-2018, 02:31 PM
I'd like to know where the thick rubber washer goes? I don't remember seeing one when I took it apart. Pic will hopefully come thru.251005 thanks.

DAM shop
03-14-2018, 02:46 PM
Whats it off of?:wondering

cainesy
03-14-2018, 02:57 PM
It's a fuel strainer that goes inside a big red tank.

DAM shop
03-14-2018, 04:16 PM
It's a fuel strainer that goes inside a big red tank.

I would assume it goes inside the petcock but that screws to the tank..

shortline10
03-14-2018, 06:11 PM
That slips over the brass tube right about in the middle , sections off the filter screen .

wonderboy
03-15-2018, 06:52 AM
That slips over the brass tube right about in the middle , sections off the filter screen .

Yup, what shortline said. See the spot on your filter tube where it is solid all the way around (near the middle)? The rubber part should be slid onto the brass tube so that when the filter tube is pushed on, the rubber sits right at that solid section.

cainesy
03-15-2018, 07:28 PM
Thanks for the replies, it's funny but when I took it apart there was no sign of a washer in the old strainer. I wonder did it dissolve over time or was it left out after a repair by the previous owner, hopefully it's the latter.