10" Tri-z Front Rim...?

[Just-Tri-It]

Has anyone ever used a 10 inch rim on the front of a Tri-z.?.
Seems I read of some experimenting on a different size a while back but not sure of the outcome.
I have seen some tires that may work well on the Z but they need a 10 inch rim.
Thanks

[Just-Tri-It]

Found a couple links with some info after all.
Thanks

[sledcrazyinCT]

Found a couple links with some info after all.
Thanks

Cool can you post the links you found, might help others looking for this info

[NeverLift]

I believe the 350X hub is a direct swap with no mods, then you put a 10" Honda wheel on. I'm Running a 10" on mine but its on inverts so applicable. But i love the endless tire choices.

249016249017

[Shawn Powell]

The only thing I personally didn’t like on the 10” rim (Honda 350x) is all the 10” tires are 7” wide. It really balloons out your bead so you run a high risk ok dropping a bead if you had low pressure for some reason. I have one for my sand tire but I found a 22x8-10 razor back so it looks ok. Just my .02


Sent from my iPhone using Tapatalk Pro

[NeverLift]

My Hoosier is a 18x6-10 and my MX/Trail tire is a 20x6-10 and work great. Mounted the 20 is only about .5" taller than the 18. However I want to try a 21x7-10 for MX as the 20x6-10 seems a bit too skinny. When i ride dunes/nasty trails I swap back to the stock hub wheel combo 23x8-12.

[Shawn Powell]

Yeah I mounted a 22 7 10 on my 10x6 and just didn’t like the way it looked. Just too blown out. I ride rough trails so my air pressure in the front never sees more than 4psi, sometimes as low as 2. And that’s with a 2 ply. I like the look of the Kenda also. Just an opinion. Also depends on how / where you ride.


Sent from my iPhone using Tapatalk Pro