View Full Version : 250sx Hondaline Rack
drsung
07-30-2017, 11:20 AM
Can anyone tell me how the Hondaline Rack connects to the grab bar? Mine just had a bolt through the U shaped clamp on the rack. I just had the rack and grab bar powder coated. It seems like there should be a grommet or rubber coating to keep it from getting scratched when the rack is rotated up.
Sent from my Pixel XL using Tapatalk
There are thin plastic bushings that go between grab bar and rack bolt mounts.
drsung
08-21-2018, 04:49 PM
I am going to bump my very old thread.
Does anyone know of a suitable replacement part for the plastic bushings on a '87 250SX with a hondaline rack?
I think I used pieces of a milk jug, or maybe some old 200es fork bushings. Either way they’ve held up just fine
Dirtcrasher
08-22-2018, 01:07 PM
Show me a picture of where it goes/what it does, and I'll show you a replacement...
drsung
08-24-2018, 10:32 PM
Here is a picture of what I am talking about. The rack swivels on the grab bar and since I just had them both powder coated I would like something there to rotate on and keep the rack from scratching the grab bar.
254136
254139
Howdy
08-24-2018, 11:26 PM
Do you have a old bike tube laying around? If so cut a piece of it and wrap it around. I have done this many times. On some you need to have 2 layers to fill the void and make it snug.
Howdy
El Camexican
08-24-2018, 11:43 PM
I've split plastic pipe to make them. Go to Home Depot and check the water and electrical selection for sizes.
drsung
08-25-2018, 01:08 AM
Ok, looks like there are lots of options for replacements. Thanks for all the suggestions.
Name Brand
09-18-2018, 07:10 AM
I used the rubber bushings from between the front bumper and front rack of a 1986 TRX250.
atc007
09-18-2018, 11:30 PM
IDK, But I assume the bushings are still available for a 2000 TRX 300, they would be Honda,and very close fitment.
sledcrazyinCT
09-19-2018, 09:42 PM
KLF 220 rear rack mounts would probably254654 work
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.