Tri z brake reservoir

[6spdls1z28]

Anyone ever try a different rear reservoir on their z? I found these on eBay looks like it would work. Mine is all sun baked
http://m.ebay.com/itm/CNC-Brake-Tank-Oil-Fluid-Resevoir-Cup-Universal-for-Kawasaki-ZX6R-10R-Z1000-KTM-/112370665788?var=&hash=item1a29d0493c%3Am%3Am4vXR7D2laN1QNGrZ8nvTbQ&_trkparms=pageci%253A42e78707-59bd-11e7-82f9-74dbd180d287%257Cparentrq%253Adfed8fc615c0a990a829 9067fffd26d3%257Ciid%253A3

[El Camexican]

I bought a generic one off of eBay for mine. Unfortunately the spigot was much smaller than the very large OEM hose, so I slipped a small hose over the spigot and then slipped the larger holes over top of that and clamped it. So far, so good.

[6spdls1z28]

I bought a generic one off of eBay for mine. Unfortunately the spigot was much smaller than the very large OEM hose, so I slipped a small hose over the spigot and then slipped the larger holes over top of that and clamped it. So far, so good.

Could you put a pic up of that

[El Camexican]

Here you go. If you buy one like this, or the ones that you were looking at earlier you will have to do the same thing as they likely have a quarter inch spigot and the Tri Z has what I believe are at least 3/8" spigots.

244242

[6spdls1z28]

Here you go. If you buy one like this, or the ones that you were looking at earlier you will have to do the same thing as they likely have a quarter inch spigot and the Tri Z has what I believe are at least 3/8" spigots.

244242

Thanks for the pic