86 Tecate.... Finally

[350xtrike.rider]

Finally sprung for a parts bike to rebuild.

Ended up giving $300 for it. The frame is cracked/rewelded in all the right places, bottom right fork tub snapped where the axle goes thru, got 2 motors in the deal and 3 boxes of parts.

Also a set 85/6 honda 250r lopro fenders. They are for sale or trade for T3 fenders. Not really sure what they are worth???

I need a swinger and shock to make this bike a roller then I'll focus on salvaging the motors to build one good one.

[christph]

It's always nice to start with a bike that needs work and see it come to fruition. Fixing it up is half the fun.

[3 Wheel Drive]

Ive got extra forks and many other 86 Tecate parts. Hit me up if you need anything.

[barnett468]

that thing had to go off a 50 foot cliff or get hit my a train to break the fork tube so i would check the frame alignment very carefully.



PREVIOUS KAWASAKI INTERNATIONAL R & D PROJECT ENGINEER AND ATV DEPARTMENT SUPERVISOR

[350xtrike.rider]

that thing had to go off a 50 foot cliff or get hit my a train to break the fork tube so i would check the frame alignment very carefully.



PREVIOUS KAWASAKI INTERNATIONAL R & D PROJECT ENGINEER AND ATV DEPARTMENT SUPERVISOR

Good thing straightening bent frames is part of my job description :lol:

It definitely could tell it's fair share of stories!

[350xtrike.rider]

What's a NOS left shroud worth?

[fieldy]

What's a NOS left shroud worth?

I recently saw a new one for $90.00 on ebay.

[350xtrike.rider]

Got her up on 3 wheels tonight. There's a banshee shock in there now, not quite right, I need a 300ex if anybody's got one lying around..

Next order of business is to rebuild the motor. I'm going to try and tackle this myself so any pointers would be greatly appreciated. I already know I'm gonna need the kicker shaft and gears and some powervalve misc. stuff.

Also where do ya'll get your nikasil plating done at? I'm not at all familiar with the process.

244907

[6spdls1z28]

So hard to find one not in pieces.

[350for350]

I can already see the beauty. I love the 2nd gen Tecates.

[barnett468]

Got her up on 3 wheels tonight. There's a banshee shock in there now, not quite right, I need a 300ex if anybody's got one lying around..

ummm....no, you need the stock original shock unless you weigh around 240 or more, and milner brown, aka onformula1, probably has a few he would sell. https://www.mustang.org.au/forum/Smileys/smilies/hysterical.gif



PREVIOUS KAWASAKI INTERNATIONAL R & D PROJECT ENGINEER AND ATV DEPARTMENT SUPERVISOR AND THE ONLY PERSON ON 3WW WITHOUT AN EDIT BUTTON OR A STAR :lol:

[nstyle73]

Watch out for the power valve governor arm nut, it is Left Hand threads. 3000 other people missed the service manual note on that.

[dabody69]

Ive got extra forks and many other 86 Tecate parts. Hit me up if you need anything.

I nedd a good shock for a T3

[barnett468]

I nedd a good shock for a T3


Send a pm to nd4speed here if 3wd doesn't have one . make sure the shaft has zero pits . you need to look at it with a magnifying glass. If you are not heavy, that shock with stock damping and a stock spring are as good as you will get unless there is a gold valve for them now. If you run an extended swing arm you will likely need a heavier spring and possibly heavier damping but that depends on your weight and how you ride it etc.



PREVIOUS KAWASAKI INTERNATIONAL R & D PROJECT ENGINEER AND ATV DEPARTMENT SUPERVISOR AND THE ONLY PERSON ON 3WW WITHOUT AN EDIT BUTTON OR A STAR :lol:

[nd4speed]

I sold all of my tecate stuff years ago, I have no parts unfortunately.

This thread contains info on alternative shock options:
http://www.3wheelerworld.com/showthread.php/94809-Kxt250-Tecate-3-What-Parts-Fit-Swap-Interchange

[barnett468]

Next order of business is to rebuild the motor.
I may have some NOS crank bearings.



PREVIOUS KAWASAKI INTERNATIONAL R & D PROJECT ENGINEER AND ATV DEPARTMENT SUPERVISOR AND THE ONLY PERSON ON 3WW WITHOUT AN EDIT BUTTON OR A STAR :Bounce

[350xtrike.rider]

Looky what I made! Greg at ORI helped me out with some missing powervalve pieces, bearings and seals!
Some fresh PJ1 Fast Black (good stuff right there.) super excited with how it turned out!
Next I need front and rear brake calipers, everything behind the carb, shock, silencer, front forks, and headlight and I'll be back in business!

[barnett468]

I'm going to see a guy that has a lot of 84, 85, and 86 parts in a day or so. I'll see what 86 parts he has and let you know but don't expect any 86 parts to be cheap.


PREVIOUS KAWASAKI INTERNATIONAL R & D PROJECT ENGINEER AND ATV DEPARTMENT SUPERVISOR AND THE ONLY PERSON ON 3WW WITHOUT AN EDIT BUTTON OR A STAR :Bounce

[350xtrike.rider]

I'm going to see a guy that has a lot of 84, 85, and 86 parts in a day or so. I'll see what 86 parts he has and let you know but don't expect any 86 parts to be cheap.

That would be awesome!

[barnett468]

.

Do you need a seat or front fender?


PREVIOUS KAWASAKI INTERNATIONAL R & D PROJECT ENGINEER AND ATV DEPARTMENT SUPERVISOR AND THE ONLY PERSON ON 3WW WITHOUT AN EDIT BUTTON OR A STAR :Bounce

[350xtrike.rider]

.

Do you need a seat or front fender?

My fender is faded and seat foam is ripped so for the right price yeah...

[barnett468]

My fender is faded and seat foam is ripped so for the right price yeah...

Fender ....... $275.00
Seat .......... $425.00

Like I said below.


....don't expect any 86 parts to be cheap.


PREVIOUS KAWASAKI INTERNATIONAL R & D PROJECT ENGINEER AND ATV DEPARTMENT SUPERVISOR AND THE ONLY PERSON ON 3WW WITHOUT AN EDIT BUTTON OR A STAR :Bounce

[350xtrike.rider]

Yeah I know, I'll stick to a wet sand and new seat cover lol

So I attempted to start it for the first time today but I guess the spark is to weak... Thought I might be able to get away with it but guess not :( Got a couple other stators to try tomorrow...

[barnett468]

He might have a cd box and a rear fender stay also. maybe around 140.00 for the fender stay.


PREVIOUS KAWASAKI INTERNATIONAL R & D PROJECT ENGINEER AND ATV DEPARTMENT SUPERVISOR AND THE ONLY PERSON ON 3WW WITHOUT AN EDIT BUTTON OR A STAR :lock:

[350xtrike.rider]

I made a homemade fender bracket thanks though.
And I put my other stator in today and it fired right up, I need some specs for tuning my 38mm mikuni to the stock bore... I'd like to run the 38 for more top end.

[barnett468]

I made a homemade fender bracket thanks though.
And I put my other stator in today and it fired right up, I need some specs for tuning my 38mm mikuni to the stock bore... I'd like to run the 38 for more top end.

You have an 86 Tecate and you want MORE top end?

What pipe and silencer do you have?

Whatever you do, start with rich jetting so you don't seize it.



PREVIOUS KAWASAKI INTERNATIONAL R & D PROJECT ENGINEER AND ATV DEPARTMENT SUPERVISOR AND THE ONLY PERSON ON 3WW WITHOUT AN EDIT BUTTON OR A STAR :lock: