PDA

View Full Version : 250sx cdi question



whiteman350x
04-01-2017, 01:08 PM
Getting my 1985 250sx out of storage. It appears that the cdi has been borrowed off of it. I have one off of an 85 250es one off of a 85 trx 250 and one off of 86 250sx. Does anyone know for sure if any of these will work?

Aulbaugh
04-01-2017, 03:20 PM
Your 85 250es is the same as your 85 sx.

350for350
04-01-2017, 08:56 PM
That's what I was thinking too.

wonderboy
04-02-2017, 09:38 AM
The Honda parts diagrams confirm the 85 250SX uses the same part number as the 85 250ES.

Dirtcrasher
04-02-2017, 12:49 PM
Hey, check your wiring right as it bends into the CDI connector.

I've now seen 2 now that seem like the the swingarm bouncing up and down with a wire in the stock electrical connector; I thought it was the carb and was ready to sell it the 1st time I've seen it !

Just for future piece of mind....

Dirtcrasher
04-02-2017, 12:53 PM
Hey all you ATC 250SX's guys, check your wiring right as it bends into the CDI connector.

I've now seen 2 now that seem as if the the swingarm pivot rotating/bouncing up and down break off a wire in the stock electrical connector; I thought it was the carb and was ready to sell it the 1st time I've seen it ! I couldn't find the problem until I unravelled the electrical tape....

Just for future piece of mind....