ps2fixer
03-09-2017, 05:23 PM
I'm working on a kit for adding ignition switches to these 3 models of 3 wheelers (ones that didn't have them factory), but the hang up is a way to mount the switch. Anyone know of any newer machines that have the same width to mount the handle bars and has a dash for an ignition switch. I'd prefer one with no neutral/reverse/temp/oil lights, but still would like to know about them.
I'm thinking the 250r is the same width as the 200x and 350x, but I haven't validated. I don't have a 85+ so if someone could measure the width that would be great.
Based on my quest so far this is what I've found:
87 200x - works well, but hard to find and out of production... I've contacted jeswinehart to see if he has a mold.
85 TRX200sx - had a guy planning to use it on one kit I sold, haven't heard back but might work, again out of production, hard to find.
Doesn't fit:
98 - TRX450S/ES too narrow doesn't fit, anyone need a complete new dash for this machine? It's probably getting ebay'ed to get my investment out of it ($50).
84 200es - too narrow, same width as the trx450s/es
250sx/es - ignition switch is the larger style, didn't check mounting width, but the only source for the switches is Honda which makes the kit kind of expensive
Thanks for any input on this. I've sold a couple kits already, and it seems to be a fairly high demand add-on, so making it easier for the end user/consumer is my end goal with this.
If you're interested in a kit, watch my ebay listing for when it's stocked. The link shouldn't change as it's a good till canceled listing.
http://www.ebay.com/itm/1985-1986-ATC350X-Wire-Harness-Ignition-Key-Switch-Adapter-Harness-ATC-350X-/201810177502?ssPageName=STRK:MESE:IT
I'm thinking the 250r is the same width as the 200x and 350x, but I haven't validated. I don't have a 85+ so if someone could measure the width that would be great.
Based on my quest so far this is what I've found:
87 200x - works well, but hard to find and out of production... I've contacted jeswinehart to see if he has a mold.
85 TRX200sx - had a guy planning to use it on one kit I sold, haven't heard back but might work, again out of production, hard to find.
Doesn't fit:
98 - TRX450S/ES too narrow doesn't fit, anyone need a complete new dash for this machine? It's probably getting ebay'ed to get my investment out of it ($50).
84 200es - too narrow, same width as the trx450s/es
250sx/es - ignition switch is the larger style, didn't check mounting width, but the only source for the switches is Honda which makes the kit kind of expensive
Thanks for any input on this. I've sold a couple kits already, and it seems to be a fairly high demand add-on, so making it easier for the end user/consumer is my end goal with this.
If you're interested in a kit, watch my ebay listing for when it's stocked. The link shouldn't change as it's a good till canceled listing.
http://www.ebay.com/itm/1985-1986-ATC350X-Wire-Harness-Ignition-Key-Switch-Adapter-Harness-ATC-350X-/201810177502?ssPageName=STRK:MESE:IT