Quick Question

[BarnBoy]

Hi, is it possible to reuse my old ATC friction clutch springs if I put a washer under them as a spacer? Or if I need new springs, what are the best ones to get?

Thanks

[DohcBikes]

Do not shim your stock springs. Worn springs are fatigued. Many things can go awry.

I recommend these EBC springs for $12 http://www.ebay.com/itm/EBC-CSK-Clutch-Springs-fits-Honda-ATC200M-1984-1985-/331916009999?hash=item4d47bc620f:g:KqYAAOSwsTxXkkG f&vxp=mtr

Also,

What's the issue that makes you wanna replace the springs?

[RubberSalt]

Old springs will cause stuff to fail sooner. Not having enough pressure on the clutches and they'll wear faster. Heavy duty springs should increase life, but make clutch work more difficult.

oddly enough, more pressure in an automatic car's transmission increases transmission life, granted the pressure doesn't blow things apart. It makes for a harder shift, and people don't like that.

[Hurley250R]

I think I may try this this winter: Opinions?

Six TRX250R friction discs
Part # 22201-KAE-000

Five TRX250R clutch plates
Part # 22321-KFO-770

One TRX400EX clutch plate
Part # 22321-MV4-000

Five TRX250R drain plug washers
Part # 94109-12000

Five CR500R clutch springs
Part # 22401-KA5-740

One TRX250R clutch cover gasket
Part # 11395-HA2-P00

[The_Steve_Man]

That is the Neil Pritchard clutch trick. The guys that have done it says it works great.

Sent from my MotoG3 using Tapatalk

[Hurley250R]

Yep. Neil's clutch mod. I'm going to try it this winter.

[BarnBoy]

Dohc, thanks, I will order those then.

Rubber Salt, thanks for the explanation. I will get new ones.

[BarnBoy]

One more quick question for Dohc, are these the same thing as what you posted?

http://www.ebay.com/itm/EBC-Clutch-Plates-CSK-Spring-Kit-for-Honda-ATC-200-M-84-85-/311584606729?hash=item488be3ca09:g:SUYAAOSwGjpXTKH W&vxp=mtr

[RubberSalt]

They are, the manufacture part number is the same for both. CSK22

[BarnBoy]

Thanks a lot. Parts ordered.