200X Float- same as 200ES float?

[Leevvii]

A question. is the '84 ATC200X carb Float- the same as '84 200ES float? The 200X runs a 24mm carb but the 200ES runs 22mm, but is it the same float?

[wonderboy]

Yes, I looked it up on the parts sites, and they are the same. At the risk of flooding this post, here is the list of machines that use this same float:

16013-439-921 FLOAT SET
1982 ATC200E A - CARBURETOR
1982 XL250R A - CARBURETOR
1983 ATC185S A - CARBURETOR
1983 ATC200 A - CARBURETOR
1983 ATC200E A - CARBURETOR
1983 ATC200X A - CARBURETOR
1983 XL185S A - CARBURETOR
1983 XL185S AC - CARBURETOR
1983 XL200R A - CARBURETOR
1983 XL200R AC - CARBURETOR
1983 XL250R A - CARBURETOR
1983 XL250R AC - CARBURETOR
1984 ATC200ES A - CARBURETOR <-----
1984 ATC200M A - CARBURETOR
1984 ATC200S A - CARBURETOR
1984 ATC200X A - CARBURETOR <----
1984 CB125S A - CARBURETOR
1984 CB125S AC - CARBURETOR
1984 TRX200 A - CARBURETOR
1984 XL200R A - CARBURETOR
1984 XL200R AC - CARBURETOR
1985 ATC200M A - CARBURETOR
1985 ATC200S A - CARBURETOR
1985 ATC200X A - CARBURETOR
1985 CB125S A - CARBURETOR
1985 CB125S AC - CARBURETOR
1986 ATC200S A - CARBURETOR
1986 ATC200X A - CARBURETOR
1986 TR200 A - CARBURETOR
1986 TRX200SX A - CARBURETOR
1987 ATC200X A - CARBURETOR
1987 TR200 A - CARBURETOR
1987 TRX200SX A - CARBURETOR
1988 NX125 A - CARBURETOR
1988 NX125 AC - CARBURETOR
1988 NX250 A - CARBURETOR
1988 NX250 AC - CARBURETOR
1988 TRX200SX A - CARBURETOR
1989 NX125 A - CARBURETOR
1989 NX125 AC - CARBURETOR
1989 NX250 A - CARBURETOR
1989 NX250 AC - CARBURETOR
1990 NX125 A - CARBURETOR
1990 NX125 AC - CARBURETOR
1990 NX250 A - CARBURETOR
1990 NX250 AC - CARBURETOR
1990 TRX200 A - CARBURETOR
1991 TRX200 A - CARBURETOR
1991 TRX200 AN - CARBURETOR
1991 TRX200D A - CARBURETOR
1991 TRX200D AN - CARBURETOR
1991 XR250L A - CARBURETOR
1991 XR250L AC - CARBURETOR
1992 TRX200D A - CARBURETOR
1992 TRX200D AN - CARBURETOR
1992 XR250L A - CARBURETOR
1992 XR250L AC - CARBURETOR
1993 TRX200D A - CARBURETOR
1993 TRX200D AN - CARBURETOR
1993 XR250L A - CARBURETOR
1993 XR250L AC - CARBURETOR
1994 TRX200D A - CARBURETOR
1994 TRX200D AN - CARBURETOR
1994 XR250L A - CARBURETOR
1994 XR250L AC - CARBURETOR
1995 TRX200D A - CARBURETOR
1995 TRX200D AN - CARBURETOR
1995 XR250L A - CARBURETOR
1995 XR250L AC - CARBURETOR
1996 TRX200D A - CARBURETOR
1996 TRX200D AN - CARBURETOR
1996 XR250L A - CARBURETOR
1996 XR250L AC - CARBURETOR
1997 TRX200D A - CARBURETOR
1997 TRX200D AN - CARBURETOR

[Leevvii]

thank you very much mate. very useful to know.
ALSO- I have an ebay carby that i purchased [stupidly] for the 200X [MIKUNI 24mm Carburetor Carb M CA06]. Will this carby work with the 200 ES BigRed233248

[oscarmayer]

Yes it will. Jetting may need to be done but yes.


Sent from my iPhone using Tapatalk