PDA

View Full Version : how to make snorkel? Honda 185s



trikes125
04-12-2016, 10:30 PM
I know how to just need some advice and what to use.can I run it straight off the carb? (My airbox isn't usuable) I was going to run straight from the carb out of the back. What size PVC should I buy I've seen people saying 1.5? And how do I get a good seal at the carb end. I will be running the crankcase breather and rear brake hose up the snorkel also and I think you have to run the carb hose any help would be great thank you.

hondaboy
04-13-2016, 10:18 PM
I used some 1 1/2 PVC pipe and a old shop vac hose on one of mine worked great

edizzle89
04-14-2016, 08:59 AM
depending on the size you might be able to use pieces of radiator hose too if you need some flex in the routing