View Full Version : Atc 110 manual clutch
1979atc
03-28-2016, 10:17 AM
I have found a s90 engine with the manual clutch. Can you use this manual clutch on the Atc 110 or is this one different from the sl90. Clutch cover is different from the sl90 cover, but didn't know if the internal parts are the same or not. Thanks
Joseph Farrow
03-28-2016, 01:40 PM
I think the only difference is the outer side cover.
Just made a little different.
1979atc
03-28-2016, 05:14 PM
I will see if I can get it for a decent price, everything is there but the top end.
shortline10
03-29-2016, 06:34 AM
I believe the splines are different on the clutch hub .
1979atc
03-29-2016, 10:36 AM
I think the splines on this one are 14mm, if I'm correct I need to get a sl 90 clutch hub 15mm? For the Atc crank. The clutch hub is there, but the clutch pack is gone. Would the 110 clutch pack work with the sl90 clutch hub?
RUNMEDOWN
03-29-2016, 12:58 PM
May be able to use the cover from a Honda Grom, or just swap in the entire Grom motor - electric start, hand clutch and fuel injected 125cc 4-stroke power!!
1979atc
03-29-2016, 01:06 PM
May be able to use the cover from a Honda Grom, or just swap in the entire Grom motor - electric start, hand clutch and fuel injected 125cc 4-stroke power!!
How bout this? Would the hydraulic clutch kits that they put on pit bikes that go into the clutch side cover work?? Making it a hand clutch.
1979atc
03-29-2016, 01:09 PM
229712
Bolt on, my brother got one of these for his pit bike. Would it work??
thcowboy
05-19-2016, 12:15 AM
Would it work to just put an s90 or something along those lines of a motor in a trike? Is the bolt pattern the same? Would the electrics work together?
Joseph Farrow
05-19-2016, 12:28 AM
Would it work to just put an s90 or something along those lines of a motor in a trike? Is the bolt pattern the same? Would the electrics work together?
The motor mounts are different. IIRC
oscarmayer
05-19-2016, 09:22 AM
229712
Bolt on, my brother got one of these for his pit bike. Would it work??
Those Chinese hydraulic levers are junk. Leak and stop working after s very short period. I recommend using a standard CR125 lever and start from there.
1979atc
05-19-2016, 11:17 AM
I'm am considering about trying it to see if it will work. I may just stick with the automatic until I find all the parts to do the sl90 clutch set up, which would take awhile to find all the parts.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.