Carb jetting

[AK47KID]

Back in December I was getting 2x atc70 fixed. They needed new carbs. And I bought after market carbs only difference is the choke is on the left side and pet cock are on the right side of the bike. Anyways I didn't know about jetting and such. And I put those carbs on them with out using the jets from the old carbs. Every thing is stock on them so I should be able to use the jets in the old carbs right? And how to I get the jets out of the old carbs? Do you just pull them out with needle nose pliars or do I need a special tool?

Sent from my HTC6500LVW using Tapatalk

[rustyhondas]

Flat head screw driver

I use Chinese carbs on our 70

Put the old jets in the new carb

[AK47KID]

They screw out?

Sent from my HTC6500LVW using Tapatalk

[AK47KID]

There too corroded and won't come out. I ruined one. Does any one know the size of the jet I need? I'm going to buy jets since these ones aren't coming out

Sent from my HTC6500LVW using Tapatalk

[Scootertrash]

All the info you need will be in the manual.

[Queef Chief]

I was thinking stock main is 58, but don't hold me to it.