Plugged jet...lag?

[plkmonster2]

The 200e is about up to par, but it still has a sort of lag. I leaned it out a bit, but it still has a problem. If you don't keep the rpm up when you shift, then you go to floor it, it will not gain any rpm, instead, it will stay at a steady speed, but over time it will slow down, then rev up. Is a jet probably plugged? I m thinking so since it sat for so long... :rolleyes:

[jeswinehart]

a easy thing to check but often over looked is the tail pipe. make sure it's cleaned out. some really weird stuff happens when they are plugged up and heck,,, it's alot easier to check then pulling off the carb.
hopefully it will be some thing simple for you,,,


john

[plkmonster2]

I guess i should check that, but i'm not able to pull off the spark arrestor, and it sounds all plugged up, and rattly. Any idea's to get the arrestor out of the 200e?

[plkmonster2]

I got it out, and found a lot of carbon in the pipe. I cleaned it all out, and cleaned all thge buildup out of the pipe and exhaust port. It starts easier. I'll try it tmrw. thanks