+6 for my 70 ...Looking Good...

[Ol Deuce]

222751:D Not to bad for the 70

[John jr]

Nice, What axle is that.

[KASEY]

your sleeves are going to have to go over the hub stops ,,, like to see what you have planned for that,,,

[Ol Deuce]

your sleeves are going to have to go over the hub stops ,,, like to see what you have planned for that,,,

The sleevematerial should be in my hands on Friday! the hub stop will be turned down so the sleeve will just pass over I want .002 clearence!:crazy::crazy:
the hubs should line up so all you have is a fine parting line !!! I Hope LoL I've been wanting to do this for a couple years now!! and now its Time !!!

I'll keep ya posted !! I have the photos of how I did this , but I want to test it first :rolleyes::D! Tehehe;);) Ol Deuce

[Ol Deuce]

Nice, What axle is that.

John it's a Honda 70 axle! My project has a +3 in the frame ! so the +6 should make this little guy look "HOT" LoL

[KASEY]

I have several +4 and + 6 axles I have built over the years,,, none of my trikes have spacers..

[Ol Deuce]

Ive studied your builds and noticed that !! I've always tried to create for my wants!!! it's my fun part of the hobby!!! The Challenge:Bounce:Bounce:Bounce

[Ol Deuce]

She 's done and lookking good Pictures aren't great I'll take more in the shop
222942222943222944

The DOM was right on the nuts 1 1/16 ID It did the job!

[Ol Deuce]

She 's done and lookking good Pictures aren't great I'll take more in the shop
222942222943222944

The DOM was right on the nuts 1 1/16 ID It did the job!:Bounce:Bounce:Bounce

[Ol Deuce]

the last of the photos ! the axle stop was app .002 larger than the axle so the outer tube has a goot fit!
222967222968222969222970

[Jmoozy27]

That's nice, looks good Randy...

[HairyJR]

John it's a Honda 70 axle! My project has a +3 in the frame ! so the +6 should make this little guy look "HOT" LoL

Randy, although I have several stock 70's, don't know what parts interchange with them. Have collected bits and pieces (frame, '83 110 CDI motor) to build a camp bike, exactly what years, model Honda axle are you using? Are you using the stock sprocket hub, carrier, and brake assemblies? Any other special machining?

"HJ" 222987 :beer

[Ol Deuce]

Randy, although I have several stock 70's, don't know what parts interchange with them. Have collected bits and pieces (frame, '83 110 CDI motor) to build a camp bike, exactly what years, model Honda axle are you using? Are you using the stock sprocket hub, carrier, and brake assemblies? Any other special machining?

"HJ" 222987 :beer

Hi HJ.... my 70 is the '84 and put the Chinese 125 manual shift 4speed! the chassis I put a 3'' spacer tube in for the xl-70 gas tank! the front end is stock but I'm using a 200x front hub cut down to use a 8x6 wheel with a 16x7-8 tire . I made the rear axle grow to a +6'' over the stock one I'll post a picture in a min.!

[Ol Deuce]

Randy, although I have several stock 70's, don't know what parts interchange with them. Have collected bits and pieces (frame, '83 110 CDI motor) to build a camp bike, exactly what years, model Honda axle are you using? Are you using the stock sprocket hub, carrier, and brake assemblies? Any other special machining?

"HJ" 222987 :beer

Hi HJ.... my 70 is the '84 and put the Chinese 125 manual shift 4speed! the chassis I put a 3'' spacer tube in for the xl-70 gas tank! the front end is stock but I'm using a 200x front hub cut down to use a 8x6 wheel with a 16x7-8 tire . I made the rear axle grow to a +6'' over the stock one I'll post a picture in a min.!
223026223027223028223029223030

[onformula1]

Killer work as always, thank you for sharing.

[tecaterob]

Nice work.....

[Ol Deuce]

Nice work.....
Thanks Rob!!

[HairyJR]

Looking good Randy.....understand machining axle hub stop bosses to fit the sleeve material and know you wouldn't cut on an expensive aftermarket axle, so again what axle did you use or did you cut and weld to fab a +6 ? Hubs look like 4 on 130 bolt pattern.

"HJ" 223038 :beer

[Ol Deuce]

Looking good Randy.....understand machining axle hub stop bosses to fit the sleeve material and know you wouldn't cut on an expensive aftermarket axle, so again what axle did you use or did you cut and weld to fab a +6 ? Hubs look like 4 on 130 bolt pattern.

"HJ" 223038 :beer

I used the stock '84 atc70 axle and put the '88 atv 200sx axle stubs and hubs on it !! 4 on 110 but I had to cut the diameter down on the hubs to fit inside the 200x wheels !!!

[HairyJR]

Thanks for the explanation, now all I need is a good welder and a lathe. After I retired the plant closed down eliminating all my access to complete projects, damm the bad luck. Don't know why Honda made the center section of the 200x so small. Had to machine my 350x hubs back in 85 to use the mounted paddle tires I had from my '83 200x.

"HJ" 223049 :beer

[Ol Deuce]

she really looks good !
http://i230.photobucket.com/albums/ee143/OlDeuce/IMG_2380_zpsylzcxjka.jpg (http://s230.photobucket.com/user/OlDeuce/media/IMG_2380_zpsylzcxjka.jpg.html)

[John jr]

WOW. Your right, She's lookin Awesome. Great job.

[OZQUAD44]

Is that a go kart axle?


Sent from my iPad using Tapatalk

[sledcrazyinCT]

Is that a go kart axle?


NOPE this one wasn't bought from a store:lol:

http://www.3wheelerworld.com/attachment.php?attachmentid=223422&stc=1

[Ol Deuce]

Is that a go kart axle?


Sent from my iPad using Tapatalk

She's a 70 axle!:Bounce:Bounce:Bounce:Bounce

[Ol Deuce]

The Disc brake hub is now done !!! 223515

[Ol Deuce]

Parts
http://i230.photobucket.com/albums/ee143/OlDeuce/IMG_3338_zps965okneu.jpg (http://s230.photobucket.com/user/OlDeuce/media/IMG_3338_zps965okneu.jpg.html)
http://i230.photobucket.com/albums/ee143/OlDeuce/IMG_3339_zps6jq1wovn.jpg (http://s230.photobucket.com/user/OlDeuce/media/IMG_3339_zps6jq1wovn.jpg.html)
http://i230.photobucket.com/albums/ee143/OlDeuce/IMG_3340_zpsoeqmudkv.jpg (http://s230.photobucket.com/user/OlDeuce/media/IMG_3340_zpsoeqmudkv.jpg.html)

[Jmoozy27]

That's looking sweet Randy, don't think I've ever seen that on a 70

[Ol Deuce]

That's looking sweet Randy, don't think I've ever seen that on a 70

It's going to be smooth ! The rotor is what I had but a 1st gen R would work well also!!

[Ol Deuce]

BTW i'm using the 200x front caliper !!!!:Dhammerhammerhammerhammer

[Ol Deuce]

the RH brake control will do the rear brake !!!! should be good !!!

[onformula1]

Boy o' boy, you guy's with your lathes...LOL

[Ol Deuce]

Boy o' boy, you guy's with your lathes...LOL

They are fun tools !!!! every one should have one !!!!!

[Ol Deuce]

Getting closer
http://i230.photobucket.com/albums/ee143/OlDeuce/IMG_2427_zps0zvzrmpo.jpg (http://s230.photobucket.com/user/OlDeuce/media/IMG_2427_zps0zvzrmpo.jpg.html)
http://i230.photobucket.com/albums/ee143/OlDeuce/IMG_2429_zpsannug0kq.jpg (http://s230.photobucket.com/user/OlDeuce/media/IMG_2429_zpsannug0kq.jpg.html)

[ironchop]

Looks like a mean little fatass.

Don't you love machining? I absolutely love the hell out of my trade. I used to be so disappointed for not finishing college but construction trades and machining/welding apprenticeships have served me far more than a veterinary degree. I make half what I would have but I REALLY love what I do and there ain't much I can't fix/ build/ adapt/ or create thanks to alot of training and a willingness to learn. I'm sure you get what I'm saying.

You do nice work, Ol Duece!

Sent from my Z998 using Tapatalk

[Ol Deuce]

The stuff I do all comes from the machine I'm working on!! kinda like it talks to me! it's total fun and the satisfaction keeps me coming back!!!! what's next who knows .........:crazy::crazy::crazy::crazy:

[Ol Deuce]

Better shot,.......... this conversion is doing good !!!
http://i230.photobucket.com/albums/ee143/OlDeuce/IMG_2430_zps7cvxybnf.jpg (http://s230.photobucket.com/user/OlDeuce/media/IMG_2430_zps7cvxybnf.jpg.html)

[Ol Deuce]

Got the rear tires ordered this afternoon!!! I did the turf 18x9.50-8 ! it should be a nice size for the rear 223930

[Ol Deuce]

trailprotrailprotrailprotrailpro:beer tehehehe:drool:

[Ol Deuce]

18s are on not bad! for a fat ass 70 LoL 224740
http://i230.photobucket.com/albums/ee143/OlDeuce/IMG_2500_zpsqsystaee.jpg (http://s230.photobucket.com/user/OlDeuce/media/IMG_2500_zpsqsystaee.jpg.html)

[Jmoozy27]

That's pretty frickin sweet randy

[Ol Deuce]

Going to try and get this little guy on the ground by this weekend :wondering!! we'll see LoL:Bounce:Bounce:Bounce:Bounce

[oscarmayer]

I can see it now. WTF I turned the wheel in the corner. It it still went straight!!
LOL. Sorry but it is kinda funny. You gotta be careful. Too wide and you end up in the weeds due to lack or turning ability. Test it before you race it. I am willing to bet you end up going to a +3 to +4 due to turning.

It is a great build sir and I definitely look forward to first ride reports!!

Sent from my iPhone using Tapatalk

[Ol Deuce]

I can see it now. WTF I turned the wheel in the corner. It it still went straight!!
LOL. Sorry but it is kinda funny. You gotta be careful. Too wide and you end up in the weeds due to lack or turning ability. Test it before you race it. I am willing to bet you end up going to a +3 to +4 due to turning.

It is a great build sir and I definitely look forward to first ride reports!!

Sent from my iPhone using Tapatalk

This has passed my mind only because it's so tiny ! my first thought was on the front tire ! not having the grip to help in the turn ! TWT:crazy:trailprotrailprotrailpro Tehehe
I do like ride reports ! if these rear tires are to fat not all is lost cauze the HPACT 185/200 needs boots also !!:wondering

[big specht]

It will take alot more body English to make it turn for sure

[KASEY]

I been running a +6 on my blue 70 forever,,, it will turn on a dime and give you 9 cents change!!!!! no tipping just slidding!!!!!
224794

[Ol Deuce]

I been running a +6 on my blue 70 forever,,, it will turn on a dime and give you 9 cents change!!!!! no tipping just slidding!!!!!
224794

Thats really good to know !!:):Bounce:Bounce:Bounce:Bounce

[Ol Deuce]

the fatass LoL
http://i230.photobucket.com/albums/ee143/OlDeuce/IMG_2505_zps672gqzun.jpg (http://s230.photobucket.com/user/OlDeuce/media/IMG_2505_zps672gqzun.jpg.html)

[onformula1]

I been running a +6 on my blue 70 forever,,, it will turn on a dime and give you 9 cents change!!!!! no tipping just slidding!!!!!
224794

What model/manufacturer are those rear tires?

I don't recall ever seeing a set like that.

Thanks

[SSLS1]

You won't have any problems turning your trike. I have a +2 frame and +4 rear running 18x9.5-8 rear tires and it turns great. Very stable and so fun and easy to slide with the 150cc engine. I prefer the handeling to my other 70 with stock specs, especially at higher speeds. :beer

224806

224807

[KASEY]

What model/manufacturer are those rear tires?

I don't recall ever seeing a set like that.

Thanks
I got them off ebay years ago,, they are 16 x 7.50 -8 I told several people about them,, several bought and the seller took everyones money and sent no tires,, I was pissed to say the least,,,, I have not ever seen anymore of them either .......

[oscarmayer]

I know those tires!! go to northern tool. they have them there, they are lawnmower tires! we looked at them a few years ago when we were running the Chinese 70cc motors for my son's racing to see if they would help with his sliding in corners due to the 70 just not having the balls of torque. we were running double the HP of a stock 70 but still on a MX track against 50CC 2-strokes, not gonna happen... :(


Thanks Casey for the info, I was worried about front tire push. we ran into that with our Chinese 70. the rear stuck out 2" wider than the fronts and it shoved the nose into the corners. we ended up having to run spacers on the front and rear just to get them to both be wider and match.

[Ol Deuce]

Good info Guys !!!! Thanks for all the posts!!!! way to much fun:D!!:Bounce:Bounce:Bounce