Aluminum rear wheels on 85 250SX

[Footy]

Which aluminum wheels will fit the 1985 ATC250SX? I bought what I think are rear wheels from a Suzuki LTZ400 and these wheels will not fit over the rear brake drum. The bolt pattern is correct. I am wondering if one of the three wheelers with the 9 inch wheel is what I need. Or maybe a 300 or 400 ex rear wheel?

[atc007]

You need a "big bell" rim to clear the drum. I'm not sure they are still available. But I think they are.

[Rajunrick]

On my SX I have a pair of 300EX rims on the rear. You will need a pair of 2" wheel spacers to make them work.

[oldskool83]

i ran douglas 9" on one of my 85sx 9in and they fit. They were offset. I sell billet wheel spacers for these bikes too.

[Gearheadtom]

300ex or 400ex won't fit either without spacers. I found a set from a Polaris Predator that would fit tho.

[Footy]

Is the predator wheel 4 on 110mm bolt pattern? Also is there a possibility that a 9 inch steel wheel from a 2wd TRX300 utility might work?

[Footy]

300ex or 400ex won't fit either without spacers. I found a set from a Polaris Predator that would fit tho.
Were the predator rims 9 inch? Also are the predator rims the same off set as the Honda?

[oldskool83]

yes and yes. all sport atv rims now days are 3in 5out offset.

[Gearheadtom]

Not really sure of the offset on them, not really sure if they were oem Polaris rims or not either. Buddy of mine had his bike apart so I borrowed one to see if it would fit.

Sent from my SGH-I257M using Tapatalk

[oldskool83]

http://www.3wheelerworld.com/showthread.php/136707-250sx-tires-rims-and-wheel-spacers/page2

buy a new set of aftermarket 9In rims and bolt it on or buy OEM rims and 1" 4x110 wheel spacers in which I make and sell and go ride.