PDA

View Full Version : Invert triples clamps


250rRoostmaster
09-22-2015, 04:07 PM
I noticed Jason Halls triples are no longer listed in the 3ww store! I was getting somewhat close to pulling the trigger!! Does anybody know anything about this?
tecaterob
09-22-2015, 04:12 PM
PM him. He just finished mine for the Tecate
yaegerb
09-22-2015, 04:44 PM
x2, PM him. Super nice guy and very easy to work with.
ATCSolace34
09-22-2015, 06:39 PM
I'm in the same boat. Almost ready to get a set of inverts for my 350x and then they disappeared from the store. Talked to Jason Hall and he said he's currently not making the kits due to cost and time it takes to make them. He did say though that he needs an order of 5 or more to get them done so if a few more people are interested and actually have the money to buy them then let him know so he can get a list together. I'm hopeful that if enough of us are interested then he will get them made for us. Definitely PM him. He may take awhile to get back to you but be patient and he will.
Dirtcrasher
09-22-2015, 09:57 PM
I have them on my 350RX. NOTHING is a better upgrade than inverts!!

Jason Hall is great to work with, but he has allot of irons in the fire.
250rRoostmaster
09-23-2015, 07:21 AM
Sounds good, thanks for the info. Does anybody remember what year CR250 forks are needed? I want to go that route as I like to jump.
Dirtcrasher
09-23-2015, 01:49 PM
It's quite a big range for Jasons clamps.

CR125 or 250, I wanna say later 90's until mid 2000's. Not positive; But, I would just message Jason Hall on facebook so you can try to find a set before your scrambling when he makes the clamps and 5 guys are looking. Grab them now; I'm sure he isn't gonna quit making them and BTW, I love mine!!

You can usually get a set for under 200$, just gotta watch for awhile.
tecaterob
09-23-2015, 04:07 PM
I used 04-07 CR125. The 03 brakes are different.

85-86 ATC 250r hub, axle
CR125 forks, brakes, disc

221997

222049
Jason Hall
09-24-2015, 02:33 PM
04-07 CR125 forks are the best ones for me as they use common spacers and rotor adapter. The 04-07 are also the best to shorten for 250R's & T-3's or anything else that needs them shorter. I will watch my PM's for people who want to be added to a list.