85 200x swing arm bearing size

[MisterRoboto]

i have an 85 200x im putting new swing arm bearings in and i trailprotrailprotrailprotrailprotrailprotrailpro up one of the bearings so im wondering if anyone has the measurements for these needle bearings so i can buy one by itself?

[yaegerb]

Don't know the size but here is 1 on eBay.
http://m.ebay.com/itm/Honda-ATC-TRX-200-250-350-NOS-OEM-Swingarm-Bearing-91071-MA0-003-/391128257034?nav=SEARCH

You are money ahead to get rid of the old style bearing and upgrade to delrin. I have been running them in both my 200x and 250r and they hold up great. Best part is you don't ruin these when pressing them in. Below is a link to BKM's delrin bushings.

http://www.3wheelerworld.com/showthread.php/173311-Delrin-83-85-200x-Swingarm-Bushings

[MisterRoboto]

oh damn i wish i would have known bout these before i got my kit already have one of my bearings in but if i cant find one of these needle bearings locally monday might just order the delrin...
are they just one piece that you slide into the swing arm?

[MisterRoboto]

just ordered a cheapo china needle bearing on amazon with prime will try to get that in and if i trailprotrailprotrailprotrailpro that up or whenever they burn out i will go to the bushings, thank you for your help

[yaegerb]

No problem. Yes they are one piece. You get rid of the sleeves, bearings, etc. these only need a little grease and a light tap with a rubber mallet and they pop right in.

[onformula1]

just ordered a cheapo china needle bearing on amazon with prime will try to get that in and if i trailprotrailprotrailprotrailpro that up or whenever they burn out i will go to the bushings, thank you for your help

I am not trying to tell you what to do, but unless you need practice removing your swingarm and playing around with bearings, especially the Chinese stuff, send them back and buy bkm's set-up.

I don't know your ability or style of riding, but unless you only ride your trike down to the mailbox once a day your bearings will be shot before the months over. :lol:

[onformula1]

Don't know the size but here is 1 on eBay.
http://m.ebay.com/itm/Honda-ATC-TRX-200-250-350-NOS-OEM-Swingarm-Bearing-91071-MA0-003-/391128257034?nav=SEARCH

You are money ahead to get rid of the old style bearing and upgrade to delrin. I have been running them in both my 200x and 250r and they hold up great. Best part is you don't ruin these when pressing them in. Below is a link to BKM's delrin bushings.

http://www.3wheelerworld.com/showthread.php/173311-Delrin-83-85-200x-Swingarm-Bushings

Some how I think we shop at a lot of the same stores! :lol:

[Jmoozy27]

Go with the delrin bushings, you will not only be supporting a member who makes them but you will also be supporting 3ww and don't forget about the good ol' US of A.

Be a patriot, buy delrin....:beer