PDA

View Full Version : 86 200x swing arm bolt


jet pilot
08-07-2015, 01:16 PM
Does anyone know if the 86 Swing arm bolt (90117-HB5-006) is the same as any other model that is still available from Honda? It was only used on the 86/87, but any slight change would warrant a new part number. Any help is appreciated.
Jmoozy27
08-07-2015, 02:00 PM
86-88 trx200sx is a direct swap. Only difference is the 200x bolt is hollow.
jet pilot
08-07-2015, 05:27 PM
86-88 trx200sx is a direct swap. Only difference is the 200x bolt is hollow.

Thanks for that info. Ill keep that in mind. I think I am going to have one made. Does anyone have a picture of the head of the bolt that they can send my way? I want to at least make it look it OEM if I am having one made.
oscarmayer
08-07-2015, 07:00 PM
Better option is to have the 250R bolt trimmed and retreaded to the size you need.
86-89 trx250r/atc250r same bolt.


Sent from my iPhone using Tapatalk
onformula1
08-07-2015, 07:47 PM
Post the measurements

Sent from my SM-G386T1 using Tapatalk
Jmoozy27
08-07-2015, 08:27 PM
http://www.3wheelerworld.com/attachment.php?attachmentid=219487&stc=1http://www.3wheelerworld.com/attachment.php?attachmentid=219485&stc=1http://www.3wheelerworld.com/attachment.php?attachmentid=219486&stc=1
Hope this helps...
jet pilot
08-07-2015, 08:46 PM
http://www.3wheelerworld.com/attachment.php?attachmentid=219487&stc=1http://www.3wheelerworld.com/attachment.php?attachmentid=219485&stc=1http://www.3wheelerworld.com/attachment.php?attachmentid=219486&stc=1
Hope this helps...

It does. Thanks!
Ol Deuce
08-07-2015, 09:41 PM
When I get in trouble and can't find the correct bolt .....! I go get a fron't axle bolt from the Big red and re make it!!!!! Simlpe !!!!1:Bounce:Bounce:Bounce:crazy:
Jmoozy27
08-07-2015, 10:31 PM
I have found many ways to solve 3 wheeler problems...
onformula1
08-08-2015, 12:20 AM
I have found many ways to solve 3 wheeler problems...

Wow, where you live your favorite tool must be a 6" brass and a 6" steel wire wheel an a bench grinder... :lol:
Jmoozy27
08-08-2015, 12:49 AM
Wow, where you live your favorite tool must be a 6" brass and a 6" steel wire wheel an a bench grinder... :lol:

Bench grinder for sure, it's a.must have down here.
deathman53
08-08-2015, 03:52 PM
isn't the 86/87 200x bolt smaller and a smaller diameter. I have several 86/87 200x bolts, 2 350x bolts(same as 86/87 200x) and a bunch of 85-89 250r bolts. I seam to remember the 250r bolts are a larger diameter, I think because I tried to use one in a 250r and it wasn't a tight fit. I then bought a 250r bolt and it was a tight fit.
oscarmayer
08-17-2015, 01:12 PM
Did this get solved?


Sent from my iPhone using Tapatalk